Port details on branch 2022Q2 |
- spice General-purpose circuit simulation program
- 3f5.2_15 cad =4 3f5.2_15Version of this port present on the latest quarterly branch.
- Maintainer: hrs@FreeBSD.org
- Port Added: unknown
- Last Update: 2024-03-02 23:54:43
- Commit Hash: 4007361
- People watching this port, also watch:: python
- License: MIT
- WWW:
- http://bwrc.eecs.berkeley.edu/Classes/IcBook/SPICE/
- Description:
- SPICE is a general-purpose circuit simulation program for nonlinear DC,
nonlinear transient, and linear AC analyses. Circuits may contain resistors,
capacitors, inductors, mutual inductors, independent voltage and current
sources, four types of dependent sources, lossless and lossy transmission
lines (two separate implementations), switches, uniform distributed RC
lines, and the five most common semiconductor devices: diodes, BJTs, JFETs,
MESFETs, and MOSFETs.
Patch Levels I and II (including a new spec command for spectral analysis)
and the level 2 JFET model are courtesy from the Macquarie University.
Online documentation at:
- ¦ ¦ ¦ ¦
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - Dependency lines:
-
- To install the port:
- cd /usr/ports/cad/spice/ && make install clean
- To add the package, run one of these commands:
- pkg install cad/spice
- pkg install spice
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.- PKGNAME: spice
- Flavors: there is no flavor information for this port.
- distinfo:
- SHA256 (spice/spice3f5.tar.gz) = cac11fe2a761241e6b6c9eaa31b938c7ffa76aeaecac09809609d3a4125cd269
SIZE (spice/spice3f5.tar.gz) = 1226185
SHA256 (spice/BSIM3v330.tar.Z) = 3d8d1739c5fb7f1e56af70e5dc05a6f9014d0954a4f3c1bcf778a494ae0087b2
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- xorgproto>=0 : x11/xorgproto
- x11.pc : x11/libX11
- xaw7.pc : x11-toolkits/libXaw
- xext.pc : x11/libXext
- xmu.pc : x11-toolkits/libXmu
- xt.pc : x11-toolkits/libXt
- Runtime dependencies:
-
- x11.pc : x11/libX11
- xaw7.pc : x11-toolkits/libXaw
- xext.pc : x11/libXext
- xmu.pc : x11-toolkits/libXmu
- xt.pc : x11-toolkits/libXt
- There are no ports dependent upon this port
Configuration Options:
- ===> The following configuration options are available for spice-3f5.2_15:
DEV_BSIM3=off: BSIM3v3 MOS Transistor Model Support
DEV_BSIM4=off: BSIM4v4 MOS Transistor Model Support
DEV_HISIM2=off: HiSIM2 IGFET Model Support
DOCS=on: Build and/or install documentation
EXAMPLES=on: Build and/or install examples
X11=on: X11 (graphics) support
===> Use 'make config' to modify these settings
- Options name:
- cad_spice
- USES:
- xorg
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|