*/*: bump PORTREVISION after the upgrade of MPICH to 4.1.2

cad/scotch: Add missing include statements in include/scotch.h

Otherwise int64_t and FILE are not found.

PR:		275527
Approved by:	thierry@FreeBSD.org (maintainer)

*: Bump PORTREVISIONs for math/mpc update to 1.3.1

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

cad: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  AMAKAWA Shuhei <amakawa@jp.FreeBSD.org>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Anders Andersson <anders@hack.org>
  *  Bruce M Simpson <bms@FreeBSD.org>
  *  Christoph Moench-Tegeder <cmt@FreeBSD.org>
  *  David Yeske <dyeske@gmail.com>
  *  Diane Bruce <db@db.net>
  *  Joachim Strombergson <watchman@ludd.ltu.se>
  *  Johnny Sorocil <jsorocil@gmail.com>
  *  Julian Jenkins <kaveman@magna.com.au>
  *  Marc Fonvieille <blackend@FreeBSD.org>

Update CONFLICTS definitions in categories a* to c*

Update the CONFLICTS definitions of ports in the following categories:

- accessibility
- archivers
- audio
- benchmarks
- biology
- cad
- chinese
- comms
- converters

An attempt has been made to use generic conflicts patterns that do not
have to be updated whenever a new version of a conflicting port is
added to the ports system.

There is a misunderstanding that the port being built/installed has to
be omitted from the conflicts pattern. This is not true - the port
being built is implicitly non-conflicting due to logic in bsd.port.mk.

Approved by:	portmgr (implicit)

Remove # $FreeBSD$ from Makefiles.

Optionize and set USES=mpi.

Modify cad/scotch to support int64.

Bump PORTREVISION of consumers because this changes the ABI.

- Build shared libraries also for 32 bits archs (missing in r557366).

- Normalize patches.

Modify cad/scotch to install shared libraries.

Chase these libraries to the consumers ports.

Switch from mpich2 to mpich.

cad/scotch: builds and run perfecly fine when built with byacc

Fix bad usage of MANDIRS

Upgrade Code_Aster to 14.4.0-1.

PR:		242655

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

Bump PORTREVISIONs of all users of math/mpc that we just updated to
version 1.1.0 (via revision 464079).

Upgrade - endly! - to Code_Aster 13.4.0-3.

Notes:

- I have (not yet) succeeded to enable MFront in this version;

- it uses math/mumps-edf, repocopied from math/mumps;

- cad/scotch is now taken out of the aster tarball;

- french/eficas is no more used: to be replaced by "aster-study" in Salome_Meca
	(the port cad/salome should be resurrected!)

Fix CONFLICTS.

Reported by:	FreeBSD Ports Conflicts Scanner

Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
   c++14-lang, c++0x, c11, or gcc-c++11-lib.

PR:		219275

Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using using Mk/bsd.octave.mk which in turn has USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
   c++11-lang, c++0x, c11, or gcc-c++11-lib.

PR:		216707

Bump PORTREVISIONS for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.8.5 to GCC 4.9.4 (at least under some
circumstances such as versions of FreeBSD or platforms), part II.

The first part covered  ports with USE_GCC=yes, USE_GCC=any, or one of
gcc-c++11-lib, openmp, nestedfct, c++11-lib as well as c++14-lang,
c++11-lang, c++0x, c11 requested via USES=compiler.

This adds ports with USES=fortran and ports using Mk/bsd.octave.mk
which in turn has USES=fortran.

PR:		214965
Reported by:	thierry

Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.

With hat:	portmgr
Sponsored by:	Absolight

Convert ports to use the options helpers in categories [abc]*, and minor fixes.

Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D3412?

Cleanup plist

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

- Upgrade to 1.5;

- Bump PORTREVISION for consumers.

Chase the upgrade of net/mpich2.

Approved by:	portmgr (non staged ports)

Add DOCS to OPTIONS_DEFINE to ports that check for PORT_OPTIONS:MDOCS.

Remove indefinite articles and trailing periods from COMMENT, plus
minor COMMENT typos and surrounding whitespace fixes. Categories A-C.

CR:		D196
Approved by:	portmgr (bapt)

- Stagify;

- since I'm there, don't reinstall the license files.

Update the default version of GCC used in the Ports Collection from
GCC 4.6.4 to GCC 4.7.3.  This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.

Part II, Bump PORTREVISIONs.

PR:		182136
Supported by:	Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by:	bdrewery (two -exp runs)

Convert all USE_FORTRAN=yes to "USES=fortran, USE_GCC=yes".  In most cases
USE_GCC=yes has been omitted though.

Remove USE_FORTRAN handling from bsd.port.mk and bsd.gcc.mk.

Minor cleanups in some ports like USE_GMAKE, NOPORTDOCS,...

Exp-run:	bdrewery
Approved by:	portmgr (bdrewery)

Convert cad to MDOCS and MEXAMPLES

In preparation for making libtool generate libraries with a sane name, fix all
LIB_DEPENDS in cad

With hat:	portmgr

Update to libmpc version 1.0.1 which brings the following fixes:

 - Switched to automake 1.11.6, see CVE-2012-3386.
 - #14669: Fixed extraction of CC from gmp.h.
 - Fixed case of intermediate zero real or imaginary part in mpc_fma,
   found by hydra with GMP_CHECK_RANDOMIZE=1346362345.

This is on top of the following changes from version 1.0

 - Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
   invariant sections) for the documentation.
 - 100% of all lines are covered by tests
 - Renamed functions
   . mpc_mul_2exp to mpc_mul_2ui
   . mpc_div_2exp to mpc_div_2ui

Add NO_STAGE all over the place in preparation for the staging support (cat:
cad)

Mark jobs unsafe
Trim headers
Convert to USES=gmake

- Get rid of PTHREAD_CFLAGS and PTHREAD_LIBS (category: cad)

Approved by:	portmgr

Upgrade to 5.1.12b.

Chase the upgrade of MPICH2.

Since I'm there, pet portlint where needed, e.g. by removing oblsolete
MD5 checksums.

PR:             ports/154715

Adding -fPIC to fix build of cad/salome.

Submitted by:   Stas Timokhin <devel (at) stasyan.com>
Feature safe:   yes

- Chase relocation of net/mpich2

- Bump PORTREVISION if needed

- Fix some portlint errors.

Bump PORTREVISION for everything that sets USE_FORTRAN=yes which now
implies lang/gcc44 up from lang/gcc43.

Approved by:    portmgr

Bump PORTREVISION due to change of USE_FORTRAN=yes to GCC 4.3.

Fix plist.

Reported by:    QAT

Upgrade to 5.0.6.

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

Upgrade to 5.0.5.

This is just a bugfix revision. No new features were added this time.

Upgrade to 5.0.4.

Make fetchable again by upgrading to 5.0.3.

Reported by:    pointyhat via linimon.

Minor upgrade to 5.0.1.

Notified by:    François Pellegrini <francois.pellegrini (at) labri.fr>
(author)

- Upgrade to Scotch-5.0
  Changelog at <http://www.labri.fr/perso/pelegrin/scotch/>

- Also install PT-Scotch, unless WITHOUT_MPI is set

- Install a copy of the CeCILL-C license

The tarball has been rerolled to include our patches.

SCOTCH is a software package and libraries for graph, mesh and hypergraph
partitioning, static mapping, and sparse matrix block ordering.

Its purpose of Scotch is to apply graph theory, with a divide and conquer
approach, to scientific computing problems such as graph and mesh partitioning,
static mapping, and sparse matrix ordering, in application domains ranging from
structural mechanics to operating systems or bio-chemistry.

Note: there is an older tarball included in Aster's distfile, but I prefer
a separate distfile from the official site.