| Port details |
- py-edalize Library for interfacing EDA tools
- 0.5.4 cad
 =0      0.5.3Version of this port present on the latest quarterly branch. - Maintainer: yuri@FreeBSD.org
- Port Added: 2023-01-08 09:42:28
- Last Update: 2024-04-05 09:15:37
- Commit Hash: 208bdd4
- Also Listed In: python
- License: BSD2CLAUSE
- WWW:
- https://github.com/olofk/edalize
- Description:
- Edalize is an award winning Python library for interacting with EDA tools.
It can create project files for supported tools and run them in batch or
GUI mode (where supported).
  ¦  ¦  ¦  ¦ 
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - There is no configure plist information for this port.
- Dependency lines:
-
- ${PYTHON_PKGNAMEPREFIX}edalize>0:cad/py-edalize@${PY_FLAVOR}
- To install the port:
- cd /usr/ports/cad/py-edalize/ && make install clean
- To add the package, run one of these commands:
- pkg install cad/py-edalize
- pkg install py39-edalize
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.
NOTE: This is a Python port. Instead of py39-edalize listed in the above command, you can pick from the names under the Packages section.- PKGNAME: py39-edalize
- Package flavors (<flavor>: <package>)
- distinfo:
- TIMESTAMP = 1712300912
SHA256 (edalize-0.5.4.tar.gz) = 0ac5bac1955afb28d1c7191298a30e799268ce96c0c42e25d4d95b3eaa4e9862
SIZE (edalize-0.5.4.tar.gz) = 374186
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- py39-setuptools-scm>0 : devel/py-setuptools-scm@py39
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- Test dependencies:
-
- py39-vunit-hdl>0 : cad/py-vunit-hdl@py39
- py39-pytest>=7,1 : devel/py-pytest@py39
- python3.9 : lang/python39
- Runtime dependencies:
-
- py39-Jinja2>=3 : devel/py-Jinja2@py39
- py39-types-Jinja2>0 : devel/py-types-Jinja2@py39
- gmake : devel/gmake
- yosys : cad/yosys
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- This port is required by:
- for Run
-
- cad/silice
Configuration Options:- No options to configure
- Options name:
- cad_py-edalize
- USES:
- python shebangfix
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
| Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
| Commit | Credits | Log message |
|---|
0.5.4
05 Apr 2024 09:15:37
 |
Yuri Victorovich (yuri) |
cad/py-edalize: update 0.5.3 → 0.5.4
Reported by: portscout |
0.5.3
29 Feb 2024 07:18:32
|
Charlie Li (vishwin) |
devel/py-setuptools-scm: update to 8.0.4
Directory and PORTNAME changed to match normalised name in release
tarball; consumers updated to match.
Although setuptools itself is specified as a run dependency in the
Python package metadata, it is currently left out here to prevent
environment pollution until at least PR 270510 is committed.
Additionally, this version of setuptools-scm requires setuptools>=61,
which means this version is only meant for USE_PYTHON=pep517 ports
as all USE_PYTHON=distutils ports will switch to devel/py-setuptools58
also after PR 270510. science/py-emmet-core is switched to
devel/py-setuptools_scm7 accordingly, as it specifies setuptools-scm<8.
devel/py-{flit-scm,hatch-vcs} have ${PY_SETUPTOOLS} added to
RUN_DEPENDS to compensate.
Further details: https://wiki.freebsd.org/Python/setuptools
Reported by: yuri
Co-authored by: matthew
Exp-run by: antoine (earlier iteration)
Approved by: yuri (science/py-emmet-core, previous iteration)
PR: 272134
Differential Revision: https://reviews.freebsd.org/D39288 |
0.5.3
10 Dec 2023 23:58:30
|
Yuri Victorovich (yuri) |
cad/py-edalize: update 0.5.1 → 0.5.3
Reported by: portscout |
0.5.1
27 Jun 2023 19:34:34
|
Rene Ladan (rene) |
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568> |
0.5.1
05 Jun 2023 05:42:58
|
Yuri Victorovich (yuri) |
cad/py-edalize: Update 0.5.0 → 0.5.1
Reported by: portscout |
0.5.0_1
23 Apr 2023 09:09:58
|
Gerald Pfeifer (gerald) |
*: Bump PORTREVISIONs for math/mpc update to 1.3.1 |
0.5.0
25 Mar 2023 17:21:18
|
Yuri Victorovich (yuri) |
cad/py-edalize: Update 0.4.1 → 0.5.0
Reported by: portscout |
0.4.1
11 Jan 2023 15:58:34
|
Dmitry Marakasov (amdmi3) |
*/*: rename CHEESESHOP to PYPI in MASTER_SITES
PR: 267994
Differential revision: D37518
Approved by: bapt |
0.4.1
08 Jan 2023 09:40:50
|
Yuri Victorovich (yuri) |
cad/py-edalize: New port: Library for interfacing EDA tools |
As an Amazon Associate I earn from qualifying purchases.