| non port: cad/openscad/Makefile |
|
SVNWeb
|
Number of commits found: 92 |
|
Thu, 27 Apr 2023
|
[ 18:25 Dima Panov (fluffy)  ]    3e45e8e (Only the first 10 of 184 ports in this commit are shown above.  )
*/*: bump all direct Boost cunsumers
|
|
Sun, 23 Apr 2023
|
[ 09:09 Gerald Pfeifer (gerald) ] 8d3e020 (Only the first 10 of 2091 ports in this commit are shown above. )
*: Bump PORTREVISIONs for math/mpc update to 1.3.1
|
|
Mon, 16 Jan 2023
|
[ 19:32 Dima Panov (fluffy) ] e1287d0 (Only the first 10 of 184 ports in this commit are shown above. )
*/*: bump libboost*.so libraries consumert after Boost upgrade
|
|
Wed, 21 Dec 2022
|
[ 19:24 Michael Reifenberger (mr) ] a79c1b4
cad/openscad: Update to 2021.01.01-20221206 (current revision)
This is needed to update math/cgal.
PR: 268478
Reported by: yuri@
|
|
Sun, 11 Sep 2022
|
[ 10:20 Felix Palmen (zirias) ] ddae4e9 (Only the first 10 of 1105 ports in this commit are shown above. )
Mk/Uses: always use colon for build/run suffix
Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.
Document in CHANGES.
PR: 266034
Exp-run by: antoine
Approved by: tcberner (mentor)
Differential Revision: https://reviews.freebsd.org/D36349
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Fri, 12 Aug 2022
|
[ 14:46 Dima Panov (fluffy) ] 4cf39de (Only the first 10 of 722 ports in this commit are shown above. )
*/*: bump all consumers after recent boost upgrade
|
|
Fri, 5 Aug 2022
|
[ 17:58 Bernard Spil (brnrd) ] 57a153b (Only the first 10 of 35 ports in this commit are shown above. )
archivers/libzip: Bump PORTREVISION on dependent ports
|
|
Wed, 20 Jul 2022
|
[ 14:20 Tobias C. Berner (tcberner) ] b46abf8 (Only the first 10 of 74 ports in this commit are shown above. )
cad: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* AMAKAWA Shuhei <amakawa@jp.FreeBSD.org>
* Alexey Dokuchaev <danfe@FreeBSD.org>
* Anders Andersson <anders@hack.org>
* Bruce M Simpson <bms@FreeBSD.org>
* Christoph Moench-Tegeder <cmt@FreeBSD.org>
* David Yeske <dyeske@gmail.com>
* Diane Bruce <db@db.net>
* Joachim Strombergson <watchman@ludd.ltu.se>
* Johnny Sorocil <jsorocil@gmail.com>
* Julian Jenkins <kaveman@magna.com.au>
* Marc Fonvieille <blackend@FreeBSD.org> (Only the first 15 lines of the commit message are shown above )
|
|
Sun, 22 May 2022
|
[ 20:17 Dima Panov (fluffy) ] b082b3d (Only the first 10 of 280 ports in this commit are shown above. )
devel/boost-all: bump all library consumers after boost upgrade
PR: 246106
|
|
Sun, 10 Apr 2022
|
[ 19:11 Charlie Li (vishwin) ] d63665f (Only the first 10 of 892 ports in this commit are shown above. )
textproc/libxml2: bump all LIB_DEPENDS consumers
This is a separate commit to facilitate easier cherry-picking for
quarterly.
PR: 262853, 262940, 262877, 263126
Approved by: fluffy (mentor)
|
|
Mon, 28 Mar 2022
|
[ 05:22 Loïc Bartoletti (lbartoletti) ] 8f81938 (Only the first 10 of 11 ports in this commit are shown above. )
devel/qscintilla-qt5: Update to 2.13.2
Change:
- https://riverbankcomputing.com/news/QScintilla_2.13.2_Released
|
|
Sat, 26 Mar 2022
|
[ 08:27 Matthias Fechner (mfechner) ] 247c7db (Only the first 10 of 867 ports in this commit are shown above. )
textproc/libxml2: bump all dependencies
This should make sure that all dependent ports will pick
up the new version commited with a13ec21cd733f67a9fc0dc00ab45268bdc236246
|
|
Sun, 6 Feb 2022
|
[ 18:36 Stefan Eßer (se) ] bdd2d4a (Only the first 10 of 69 ports in this commit are shown above. )
Update CONFLICTS definitions in categories a* to c*
Update the CONFLICTS definitions of ports in the following categories:
- accessibility
- archivers
- audio
- benchmarks
- biology
- cad
- chinese
- comms
- converters
An attempt has been made to use generic conflicts patterns that do not
have to be updated whenever a new version of a conflicting port is
added to the ports system.
There is a misunderstanding that the port being built/installed has to
be omitted from the conflicts pattern. This is not true - the port
being built is implicitly non-conflicting due to logic in bsd.port.mk.
Approved by: portmgr (implicit)
|
|
Thu, 27 Jan 2022
|
[ 20:12 Loïc Bartoletti (lbartoletti) ] 354d8cf (Only the first 10 of 12 ports in this commit are shown above. )
*/*: Update qscintilla2 to 2.13.1
Changes:
- https://riverbankcomputing.com/news/QScintilla_2.13.1_Released
|
|
Sat, 16 Oct 2021
|
[ 09:51 Jimmy Olgeni (olgeni) ] 4460cf7 (Only the first 10 of 476 ports in this commit are shown above. )
*: fix tab vs. space issues, and comments according to the guide.
|
|
Thu, 2 Sep 2021
|
[ 18:44 Loïc Bartoletti (lbartoletti) ] 912ab64
cad/openscad*: Fix build against CGAL 5.3
PR: 258085
Approved by: wen
Obtained from: https://github.com/openscad/openscad/pull/3844
|
|
Tue, 31 Aug 2021
|
[ 19:50 Bernhard Froehlich (decke) ] 62e4bfe
cad/openscad: Add CPE information
Approved by: portmgr (blanket)
|
|
Tue, 27 Jul 2021
|
[ 18:55 Loïc Bartoletti (lbartoletti) ] 8b9c482 (Only the first 10 of 49 ports in this commit are shown above. )
*/*: PyQt Update qscintilla2 to 2.13.0 and py-qt5-sip to 12.9.0
Changes:
- https://riverbankcomputing.com/news/QScintilla_2.13.0_Released
- https://www.riverbankcomputing.com/hg/sip/raw-file/tip/NEWS
PR: 257308
Exp-run by: antoine
|
|
Mon, 12 Jul 2021
|
[ 12:36 Loïc Bartoletti (lbartoletti) ] 9713ff9 (Only the first 10 of 46 ports in this commit are shown above. )
devel/qscintilla2: Update to 2.12.1
Changelog:
https://riverbankcomputing.com/news/QScintilla_2.12.1_Released
PR: 257002
Exp-run by: antoine
|
|
Tue, 22 Jun 2021
|
[ 18:53 Kevin Bowling (kbowling) ] da3162c (Only the first 10 of 914 ports in this commit are shown above. )
graphics/mesa-libs: Bump reverse deps for libglvnd
Per discussion with bapt on helping pkg handle the changing of these
deps and avoiding impossible upgrade senarios.
PR: 246767
Reviewed by: manu, bapt
Approved by: x11
Differential Revision: https://reviews.freebsd.org/D30824
|
|
Thu, 17 Jun 2021
|
[ 04:51 Loïc Bartoletti (lbartoletti) ] 6d6c552 (Only the first 10 of 11 ports in this commit are shown above. )
math/cgal: Update to 5.2.1
- Remove files/patch-CMakeLists.txt
- Remove LD_CONFIG and move USES (pet porlint)
- Bump ports
Changes:
- https://www.cgal.org/2021/03/17/cgal521/
- https://www.cgal.org/2020/12/22/cgal52/
PR: 255171
Approved by: wen
|
|
Mon, 19 Apr 2021
|
[ 08:00 Tobias Kortkamp (tobik) ] 1bf865f (Only the first 10 of 52 ports in this commit are shown above. )
Clean up all commented PORTREVISION and PORTEPOCH lines
No revision bump tool that we have cleans them up or deals with
them, so we end up with duplicated lines. Instead of implementing
that just clean up the 51 ports that do this.
PORTREVISION and PORTEPOCH can be set to 0 explicitly instead if
you need a reminder or placeholder.
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Tue, 16 Mar 2021
|
[ 09:29 lbartoletti ]   (Only the first 10 of 57 ports in this commit are shown above. )
PyQt5: Update PyQt5 to 5.15.4 and py-qtbuilder to 1.9.1
PR: 254218
Exp-run by: antoine
|
|
Mon, 8 Mar 2021
|
[ 06:49 lbartoletti ] (Only the first 10 of 100 ports in this commit are shown above. )
PyQt5: Update PyQt5 to 5.15.3, QScintilla2 to 2.12.0, py-qtbuilder to 1.9.0
* PyQt5: update to 5.15.3
This is a minor feature and bug-fix release. There are corresponding releases of
the other PyQt5-related packages.
- Added the missing QImage.setAlphaChannel().
- Support for the QtNetworkAuth library has been moved to a separate
PyQtNetworkAuth package.
- Wheels no longer bundle the corresponding Qt libraries and instead
automatically install them from an external wheel.
* QScintilla2: update to 2.12.0
This adds support for Qt6 and removes support for Qt4.
- Change the new distname (again)i due to a conflict
- Use the new sip-build system
* devel/py-qtbuilder: update to 1.9.0
* devel/py-sip: fix flavor for sip-distinfo
PR: 253865
Exp-run by: antoine
|
|
Tue, 9 Feb 2021
|
[ 21:46 mr ]
Update openscad to 2021.01 and openscad-devel to the latest commit
|
|
Mon, 18 Jan 2021
|
[ 19:03 lbartoletti ] (Only the first 10 of 44 ports in this commit are shown above. )
Update qscintilla2 to 2.11.6
|
|
Sat, 12 Dec 2020
|
[ 17:04 thierry ] (Only the first 10 of 80 ports in this commit are shown above. )
- Upgrade math/eigen3 to 3.3.8;
- Add some dependencies which might be detected by Find_Package but not
registered;
- Bump PORTREVISION of consumers.
PR: 250833
Submitted by: /me
Approved by: tcberner@ (KDE / maintainer) + exp-run
|
|
Mon, 5 Oct 2020
|
[ 15:50 lbartoletti ] (Only the first 10 of 122 ports in this commit are shown above. )
Update PyQt to 5.15.0, py-sip to 4.19.24 and qscintilla2 to 2.11.5
- Update PyQt to 5.15.0, py-sip to 4.19.24 and qscintilla2 to 2.11.5
- Use pypi for PYQT [1]
- Add devel/py-qt5-sip (Don't use it for now. It will be used in future updates
of PyQt with py-sip >= 5)
- Add missing py-qt5 ports: comms/py-qt5-sensors, devel/py-qt5-location,
devel/py-qt5-remoteobjects, net/py-qt5-networkauth
- Strip libs
- Refactor *_PATH and *_PORT parts
[1] RiverBankComputing doesn't offer links to download latest version of some
ports
PR: 247369
Reviewed by: tcberner
Differential Revision: https://reviews.freebsd.org/D25749
Exp-run by: antoine
|
|
Fri, 8 May 2020
|
[ 05:35 lbartoletti ] (Only the first 10 of 19 ports in this commit are shown above. )
smath/cgal: Update to 5.0.2
The new version of CGAL brings improvements and a lot of changes, including 2
major ones [1](header only[2] and require c++14) requiring to patch all software
depending on it.
[1] https://www.cgal.org/2019/11/08/cgal50/
[2] https://doc.cgal.org/latest/Manual/installation.html
math/cgal:
- Update to 5.0.2
databases/sfcgal:
- Fix with cgal5 : use c++14 and add gmpxx link
(Only the first 15 lines of the commit message are shown above )
|
|
Sat, 11 Apr 2020
|
[ 05:04 lbartoletti ] (Only the first 10 of 67 ports in this commit are shown above. )
Update py-sip to 4.19.21 and qscintilla2 to 2.11.4
- Update py-sip to 4.19.21
- Update qscintilla2 to 2.11.4
- Replace MASTER_SITE_RIVERBANK with https versions
- Replace QSCI2_DISTNAME to match with the new one
PR: 245308
Approved by: tcberner (mentor)
Exp-run by: antoine
|
|
Wed, 11 Dec 2019
|
[ 17:53 jbeich ] (Only the first 10 of 417 ports in this commit are shown above. )
devel/boost-*: update to 1.72.0
Changes: http://www.boost.org/users/history/version_1_72_0.html
PR: 241449
Exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D22136
|
|
Mon, 4 Nov 2019
|
[ 21:36 zeising ] (Only the first 10 of 43 ports in this commit are shown above. )
Add USES=xorg USES=gl, ports categories c
Add USES=xorg, USES=gl and in a few cases USES=gnome to ports in categories
starting with 'c'.
|
|
Fri, 25 Oct 2019
|
[ 15:41 jbeich ]
cad/openscad: unbreak with boost 1.72
src/parser.y:68:6: error: no template named 'stack' in namespace 'std'
std::stack<LocalScope *> scope_stack;
~~~~~^
|
|
Mon, 19 Aug 2019
|
[ 15:35 jbeich ] (Only the first 10 of 412 ports in this commit are shown above. )
devel/boost-*: update to 1.71.0
Changes: http://www.boost.org/users/history/version_1_71_0.html
PR: 238827
Exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D20774
|
|
Sun, 4 Aug 2019
|
[ 17:15 yuri ]
devel/double-conversion: Update 3.0.0 -> 3.1.5-11
Maintainer reset due to the extended timeout, as per policy.
Take maintainership.
7 ports are bumped.
PR: 239367
Approved by: waitman@waitman.net (maintainer's timeout; ~6months on a PR#235789
for the same port)
|
|
Fri, 26 Jul 2019
|
[ 20:46 gerald ] (Only the first 10 of 3853 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
|
|
Thu, 23 May 2019
|
[ 15:50 mr ]
Update to 2019.05.10
|
|
Fri, 12 Apr 2019
|
[ 06:36 jbeich ] (Only the first 10 of 392 ports in this commit are shown above. )
devel/boost-*: update to 1.70.0
Changes: http://www.boost.org/users/history/version_1_70_0.html
PR: 235956
Exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D19303
|
|
Sun, 10 Mar 2019
|
[ 09:19 mr ]
Bump PORTREVISION seems to be needed
|
[ 04:59 tobik ]
cad/openscad: Fix LIB_DEPENDS after r495203
|
|
Sat, 9 Mar 2019
|
[ 21:11 mr ]
Update to the 2019.03.03 pre-release and switch to QT5 so that the port doesn't
get deleted
during QT4 wipeout.
|
|
Wed, 26 Dec 2018
|
[ 09:06 tcberner ] (Only the first 10 of 48 ports in this commit are shown above. )
Update math/eigen3 to 3.3.7
- http://eigen.tuxfamily.org/index.php?title=ChangeLog#Eigen_3.3.6
- http://eigen.tuxfamily.org/index.php?title=ChangeLog#Eigen_3.3.7
|
|
Wed, 12 Dec 2018
|
[ 01:35 gerald ] (Only the first 10 of 3168 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
|
[ 00:15 jbeich ] (Only the first 10 of 415 ports in this commit are shown above. )
devel/boost-*: update to 1.69.0
Changes: http://www.boost.org/users/history/version_1_69_0.html
PR: 232525
Exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D17645
|
|
Sun, 2 Dec 2018
|
[ 15:41 rene ] (Only the first 10 of 464 ports in this commit are shown above. )
Mark QT4 ports/functionality for removal on 2019-03-15
While here, chase some KDE4 ports and functionality, these are scheduled for
removal on 2018-12-31. Change the default option/flavor to QT5 where applicable
or use alternative toolkits like GTK.
Submitted by: tcberner
Reviewed by: adridg, jhale, rene, tcberner
Approved by: portmgr (implicit, flavor hook)
Differential Revision: https://reviews.freebsd.org/D17741
|
|
Fri, 2 Nov 2018
|
[ 13:32 rene ] (Only the first 10 of 243 ports in this commit are shown above. )
Remove compatibility code for FreeBSD < 11.2 from all ports.
Simplify some ports where DragonFlyBSD no longer needs to be special-cased.
Submitted by: rene
Reviewed by: bapt, jbeich
Differential Revision: https://reviews.freebsd.org/D17724
|
|
Tue, 11 Sep 2018
|
[ 18:34 zeising ] (Only the first 10 of 331 ports in this commit are shown above. )
Change x11/xorgproto to become a build dep
Change x11/xorgproto to become a build time dependency when added to
USE_XORG. Change the dependency to be on the port, rather than a file the
port installs.
Fix fallout.
Bump portrevision on depending ports.
PR: 230909
Reviewed by: eadler
Approved by: portmgr (antoine)
Obtained
from: https://github.com/FreeBSDDesktop/freebsd-ports/tree/feature/xorgproto
exp-run: antoine
Differential Revision: https://reviews.freebsd.org/D16906
|
|
Thu, 9 Aug 2018
|
[ 06:58 jbeich ] (Only the first 10 of 404 ports in this commit are shown above. )
devel/boost-*: update to 1.68.0
- Switch to C++14 for libboost_system to support C++14 consumers
Changes: http://www.boost.org/users/history/version_1_68_0.html
PR: 229569
Exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D16165
|
|
Sun, 29 Jul 2018
|
[ 22:18 gerald ] (Only the first 10 of 1480 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
|
|
Thu, 28 Jun 2018
|
[ 17:39 tcberner ] (Only the first 10 of 1416 ports in this commit are shown above. )
Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk
From now on, ports that depend on Qt4 will have to set
USES= qt:4
USE_QT= foo bar
ports depending on Qt5 will use
USES= qt:5
USE_QT= foo bar
PR: 229225
Exp-run by: antoine
Reviewed by: mat
Approved by: portmgr (antoine)
Differential Revision: -https://reviews.freebsd.org/D15540
|
|
Sun, 29 Apr 2018
|
[ 16:19 tcberner ] (Only the first 10 of 65 ports in this commit are shown above. )
Update the QScintilla2 ports to 2.10.4
|
|
Sun, 22 Apr 2018
|
[ 18:16 mr ]
Add openscad-devel to the build and register conflict.
|
|
Thu, 19 Apr 2018
|
[ 07:08 ale ] (Only the first 10 of 60 ports in this commit are shown above. )
Update mpfr to 4.0.1 release and bump PORTVERSION of dependent ports.
|
|
Wed, 18 Apr 2018
|
[ 13:57 jbeich ] (Only the first 10 of 388 ports in this commit are shown above. )
devel/boost-*: update to 1.67.0
Changes: http://www.boost.org/users/history/version_1_67_0.html
PR: 227427
Exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D15030
|
|
Fri, 9 Mar 2018
|
[ 20:47 tcberner ]
Fix cad/openscad shebang
Error: '/usr/local/bin/python' is an invalid shebang you need
USES=shebangfix for 'share/openscad/libraries/MCAD/get_submodules.py
The existing shebang fix on the py file did nothing without USES=python.
Python already was an implied dependency.
Approved by: portmgr blanket
|
|
Sun, 18 Feb 2018
|
[ 09:55 rakuco ] (Only the first 10 of 71 ports in this commit are shown above. )
Update QScintilla 2.10.2.
Upstream has renamed its libraries and we no longer need to patch
devel/qscintilla-qt5 to create a library whose name does not conflict with
devel/qscintilla's. However, the library names are different so we need to bump
PORTREVISION in several ports (the SOVERSION has changed too).
Thanks to antoine for the exp-run.
PR: 225928
|
|
Thu, 18 Jan 2018
|
[ 04:11 jbeich ] (Only the first 10 of 356 ports in this commit are shown above. )
devel/boost-*: update to 1.66.0
Changes: http://www.boost.org/users/history/version_1_66_0.html
PR: 223922
Exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D13279
|
|
Tue, 2 Jan 2018
|
[ 16:49 tcberner ] (Only the first 10 of 26 ports in this commit are shown above. )
New USES=eigen
Usage:
USES=eigen:<version>[,<type>]
version: 2 or 3 (required)
type: build (default), run
For example:
USES=eigen:2,build,run
will add a BUILD- and RUN_DEPENDS on math/eigen2, and
USES=eigen:3
will add a BUILD_DEPENDS on math/eigen3.
* Convert the existing ports to use it
- biology/iqtree: remove run time dependency (seemed not to be needed)
- graphics/movit: remove run time dependency (seemed not to be needed)
- science/avogadro: add run time dependeny (installed cmake file requires it
to be present)
Reviewed by: rakuco, mat
Differential Revision: https://reviews.freebsd.org/D13702
|
|
Sat, 18 Nov 2017
|
[ 19:32 zeising ] (Only the first 10 of 65 ports in this commit are shown above. )
Bump portrevision to chase graphics/glew shard library version update.
PR: 223370
Submitted by: zeising
exp-run by: antoine
Approved by: antoine
|
|
Mon, 25 Sep 2017
|
[ 00:08 jbeich ] (Only the first 10 of 342 ports in this commit are shown above. )
devel/boost-*: update to 1.65.1
Changes: http://www.boost.org/users/history/version_1_65_1.html
PR: 218835
Approved by: maintainer timeout (1.65.1: 2 weeks; 1.65.0: 1 month)
Tested by: jhibbits (on powerpc64, earlier version)
Exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D11582
|
[ 00:05 jbeich ] (Only the first 10 of 327 ports in this commit are shown above. )
devel/boost-*: enable C++11 features
PR: 218835
Obtained from: https://github.com/DragonFlyBSD/DeltaPorts/pull/690
Approved by: maintainer timeout (2 months)
Exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D11582
|
|
Sun, 10 Sep 2017
|
[ 20:55 gerald ] (Only the first 10 of 1201 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
c++14-lang, c++0x, c11, or gcc-c++11-lib.
PR: 219275
|
|
Tue, 23 May 2017
|
[ 05:03 rezny ] (Only the first 10 of 711 ports in this commit are shown above. )
Revision bump of all ports with USE_GL after consolidation of mesa-libs
Approved by: swills (mentor)
Differential Revision: https://reviews.freebsd.org/D10845
|
|
Tue, 2 May 2017
|
[ 06:48 jbeich ] (Only the first 10 of 336 ports in this commit are shown above. )
devel/boost-*: update to 1.64.0
Changes: http://www.boost.org/users/history/version_1_64_0.html
PR: 218835
Approved by: office (bapt)
Exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D10472
|
|
Sat, 1 Apr 2017
|
[ 15:23 gerald ] (Only the first 10 of 1118 ports in this commit are shown above. )
Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using using Mk/bsd.octave.mk which in turn has USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
c++11-lang, c++0x, c11, or gcc-c++11-lib.
PR: 216707
|
|
Fri, 6 Jan 2017
|
[ 08:45 jbeich ] (Only the first 10 of 324 ports in this commit are shown above. )
devel/boost-*: update to 1.63.0
Changes: http://www.boost.org/users/history/version_1_63_0.html
PR: 215598
Exp-run by: antoine
Approved by: office (bapt)
MFH: 2017Q1
|
|
Wed, 28 Dec 2016
|
[ 17:55 amdmi3 ]
- No more broken after removing gcc requirement from math/cgal
Approved by: portmgr blanket
|
|
Sun, 25 Dec 2016
|
[ 17:26 amdmi3 ]
- Mark broken in FreeBSD 11.x+ i386: this port can't build while cgal is built
with gcc and boost is built with clang
Approved by: portmgr blanket
|
|
Wed, 23 Nov 2016
|
[ 12:45 jbeich ] (Only the first 10 of 353 ports in this commit are shown above. )
devel/boost-*: update to 1.62.0
- Enable `long double` C99 math usage
- Switch 9.x back to building with GCC
Changes: http://www.boost.org/users/history/
PR: 199601
Submitted by: Chen Xu, bapt, amdmi3, truckman (based on)
Reviewed by: rakuco (kde) (earlier version)
Exp-run by: antoine (3 tries), truckman (consumers only, earlier versions)
Approved by: bapt (office)
|
|
Fri, 1 Apr 2016
|
[ 13:29 mat ] (Only the first 10 of 1009 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.
With hat: portmgr
Sponsored by: Absolight
|
|
Mon, 8 Feb 2016
|
[ 11:16 amdmi3 ]
- Fix build with boost 1.60
- Fix LICENSE
PR: 199601
Approved by: portmgr blanket
|
|
Sun, 13 Dec 2015
|
[ 12:45 rakuco ] (Only the first 10 of 22 ports in this commit are shown above. )
Update PyQt4 to 4.11.4, SIP to 4.17 and QScintilla2 to 2.9.1.
Bring in some long overdue updates, some of which are required for us to
later land the PyQt5 ports.
One big change with this update is that the PyQt4 ports now install their
.sip files into share/py-sip/PyQt4 instead of share/py-sip. This way we do
not end up with directories like share/py-sip/QtCore, which are especially
confusing once PyQt5 lands and starts installing files with the same names.
Other noteworthy items:
- PORTREVISION has been bumped on ports depending on devel/qscintilla2
because libqscintilla2.so's SOVERSION has changed.
- graphics/seexpr has been converted to USE_PYQT, as the file it used to
define a build-time dependency on x11-toolkits/py-qt4-gui has moved.
Once again, big thanks to Tobias Berner <tcberner@gmail.com> and Guido Falsi
(madpilot@) for their initial work on these ports as part of the effort to
land PyQt5 into the tree (see D2910 in Phabricator for an earlier version of
the PyQt5 patch set).
PR: 205143
|
|
Wed, 29 Jul 2015
|
[ 16:19 amdmi3 ]
- Fix shebangs
- Add LICENSE_FILE
Approved by: portmgr blanket
MFH: 2015Q3 (blanket)
|
|
Mon, 1 Jun 2015
|
[ 09:08 wen ]
- Update math/cgal to 4.6
- Bump PORTREVISION of the ports depends on cgal
|
|
Sat, 4 Apr 2015
|
[ 18:54 mr ]
Try to use a newer compiler.
Noticed by: Andrea Venturoli
|
|
Thu, 26 Mar 2015
|
[ 17:25 mr ]
Upgrade to version 2015.03
PR: 198572
Submitted by: Pedro F. Giffuni
|
|
Sun, 5 Oct 2014
|
[ 11:28 wen ]
- Bump PORTREVISION to chase the update of math/cgal
|
|
Wed, 10 Sep 2014
|
[ 20:50 gerald ] (Only the first 10 of 3171 ports in this commit are shown above. )
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
|
|
Sun, 27 Jul 2014
|
[ 18:23 makc ]
cad/openscad:
- Update to 2014.03
- Update MASTER_SITES
- Switch dependency from math/eigen2 to math/eigen3
- USES+= desktop-file-utils pkgconfig
- Remove patch, pass required bits to qmake instead
PR: 191788
Approved by: maintainer timeout (17 days)
|
|
Fri, 22 Nov 2013
|
[ 12:55 makc ] (Only the first 10 of 42 ports in this commit are shown above. )
- Convert to USES=qmake (and other USES while I'm here)
- Add state support
- Convert LIB_DEPENDS to new style, adjust USE_QT4 components, etc.
Approved by: portmgr (blanket approval)
|
|
Fri, 20 Sep 2013
|
[ 15:58 bapt ] (Only the first 10 of 103 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
cad)
|
|
Sat, 11 May 2013
|
[ 15:14 wen ]
- Update the Makefile header
- Minor cleanup in Makefile
|
[ 15:07 wen ]
- Update to 2013.1 [1]
- Add LICENSE [1]
- Update MASTER_SITES [1]
- Fix the flex dependency [1]
- Fix the build with custom PREFIX and LOCALBASE
- Trim Makefile headers
- Update LIB_DEPENDS
PR: 177064 [1]
Submitted by: Pedro Giffuni <giffunip@tutopia.com> [1]
Approved by: maintainer(timeout, > 50 days)
|
|
Wed, 27 Jun 2012
|
[ 01:14 avilla ]
- Detect eigen2 by checking for .pc file, not min. port version.
If a user had eigen3 installed, but not eigen2, the min. port version
check would not differentiate between the two.
Submitted by: Jason E. Hale <bsdkaffee at gmail.com> via area51
|
|
Wed, 6 Jun 2012
|
[ 06:44 miwi ] (Only the first 10 of 587 ports in this commit are shown above. )
- Convert USE_QT_VER=4 and QT_COMPONETS to USE_QT4
Review by: bapt, David Naylor (kde team)
|
|
Fri, 1 Jun 2012
|
[ 05:26 dinoex ] (Only the first 10 of 4371 ports in this commit are shown above. )
- update png to 1.5.10
|
|
Wed, 25 Apr 2012
|
[ 13:36 mr ]
Update to openscad 2011.12
Suggested by: L Campbell
|
|
Sun, 28 Aug 2011
|
[ 13:41 mr ]
Add rcc to the qt4 dependencies.
|
|
Sat, 27 Aug 2011
|
[ 08:27 mr ]
Try to fix build.
Reminded by: pav@
|
|
Fri, 19 Aug 2011
|
[ 11:02 mr ]
Add openscad.
OpenSCAD is a software for creating 3D CAD objects.
Unlike most free software for creating 3D models, it does not focus on
the artistic aspects of 3D modelling but instead on the CAD aspects.
Thus it is more suitable for creating 3D models of machine parts but
perhaps not when creating computer-animated movies.
OpenSCAD is not an interactive modeller. Instead it is something like
a 3D-compiler that reads in a script file that describes the object
and renders the 3D model from this script file. This gives designers
full control over the modelling process and enables them to easily
change any step in the modelling process or make designes that are
defined by configurable parameters.
WWW: http://www.openscad.org/
Obtained from (slightly): OpenBSD
|
Number of commits found: 92 |
As an Amazon Associate I earn from qualifying purchases.