| non port: cad/openscad-devel/Makefile |
|
SVNWeb
|
Number of commits found: 59 |
|
Sun, 23 Apr 2023
|
[ 09:09 Gerald Pfeifer (gerald)  ]    8d3e020 (Only the first 10 of 2091 ports in this commit are shown above.  )
*: Bump PORTREVISIONs for math/mpc update to 1.3.1
|
|
Wed, 21 Dec 2022
|
[ 20:07 Michael Reifenberger (mr) ] 71aaae4
cad/openscad-devel: Update to current 2022.12.20
|
|
Sun, 11 Sep 2022
|
[ 10:20 Felix Palmen (zirias) ] ddae4e9 (Only the first 10 of 1105 ports in this commit are shown above. )
Mk/Uses: always use colon for build/run suffix
Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.
Document in CHANGES.
PR: 266034
Exp-run by: antoine
Approved by: tcberner (mentor)
Differential Revision: https://reviews.freebsd.org/D36349
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Tue, 6 Sep 2022
|
[ 17:44 Michael Reifenberger (mr) ] a025e9c
cad/openscad-devel: Fix build
Remove qmake from USES.
Remove buildtools, add qmake_build to USE_QT.
Add two patches which got missed previously.
This should satisfy the build.
|
|
Mon, 5 Sep 2022
|
[ 10:20 Michael Reifenberger (mr) ] 10b4426
cad/openscad-devel: Update and unbreak
Update to the current state as of 2022.09.03 and try to unbreak.
|
|
Fri, 12 Aug 2022
|
[ 14:46 Dima Panov (fluffy) ] 4cf39de (Only the first 10 of 722 ports in this commit are shown above. )
*/*: bump all consumers after recent boost upgrade
|
|
Fri, 5 Aug 2022
|
[ 17:58 Bernard Spil (brnrd) ] 57a153b (Only the first 10 of 35 ports in this commit are shown above. )
archivers/libzip: Bump PORTREVISION on dependent ports
|
|
Wed, 20 Jul 2022
|
[ 14:20 Tobias C. Berner (tcberner) ] b46abf8 (Only the first 10 of 74 ports in this commit are shown above. )
cad: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* AMAKAWA Shuhei <amakawa@jp.FreeBSD.org>
* Alexey Dokuchaev <danfe@FreeBSD.org>
* Anders Andersson <anders@hack.org>
* Bruce M Simpson <bms@FreeBSD.org>
* Christoph Moench-Tegeder <cmt@FreeBSD.org>
* David Yeske <dyeske@gmail.com>
* Diane Bruce <db@db.net>
* Joachim Strombergson <watchman@ludd.ltu.se>
* Johnny Sorocil <jsorocil@gmail.com>
* Julian Jenkins <kaveman@magna.com.au>
* Marc Fonvieille <blackend@FreeBSD.org> (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 7 Jun 2022
|
[ 14:33 Dmitry Marakasov (amdmi3) ] 58ae3d4
cad/openscad-devel: mark BROKEN
Approved by: portmgr blanket
|
|
Thu, 26 May 2022
|
[ 19:45 Michael Reifenberger (mr) ] ae7dd63
cad/openscad-devel: Update to 2022.05.20
Use the version as of 2022.05.20
|
|
Sun, 22 May 2022
|
[ 20:17 Dima Panov (fluffy) ] b082b3d (Only the first 10 of 280 ports in this commit are shown above. )
devel/boost-all: bump all library consumers after boost upgrade
PR: 246106
|
|
Sun, 10 Apr 2022
|
[ 19:11 Charlie Li (vishwin) ] d63665f (Only the first 10 of 892 ports in this commit are shown above. )
textproc/libxml2: bump all LIB_DEPENDS consumers
This is a separate commit to facilitate easier cherry-picking for
quarterly.
PR: 262853, 262940, 262877, 263126
Approved by: fluffy (mentor)
|
|
Mon, 28 Mar 2022
|
[ 05:22 Loïc Bartoletti (lbartoletti) ] 8f81938 (Only the first 10 of 11 ports in this commit are shown above. )
devel/qscintilla-qt5: Update to 2.13.2
Change:
- https://riverbankcomputing.com/news/QScintilla_2.13.2_Released
|
|
Sat, 26 Mar 2022
|
[ 08:27 Matthias Fechner (mfechner) ] 247c7db (Only the first 10 of 867 ports in this commit are shown above. )
textproc/libxml2: bump all dependencies
This should make sure that all dependent ports will pick
up the new version commited with a13ec21cd733f67a9fc0dc00ab45268bdc236246
|
|
Thu, 27 Jan 2022
|
[ 20:12 Loïc Bartoletti (lbartoletti) ] 354d8cf (Only the first 10 of 12 ports in this commit are shown above. )
*/*: Update qscintilla2 to 2.13.1
Changes:
- https://riverbankcomputing.com/news/QScintilla_2.13.1_Released
|
|
Sat, 16 Oct 2021
|
[ 09:51 Jimmy Olgeni (olgeni) ] 4460cf7 (Only the first 10 of 476 ports in this commit are shown above. )
*: fix tab vs. space issues, and comments according to the guide.
|
|
Thu, 2 Sep 2021
|
[ 18:44 Loïc Bartoletti (lbartoletti) ] 912ab64
cad/openscad*: Fix build against CGAL 5.3
PR: 258085
Approved by: wen
Obtained from: https://github.com/openscad/openscad/pull/3844
|
|
Tue, 31 Aug 2021
|
[ 19:50 Bernhard Froehlich (decke) ] 667d2d1
cad/openscad-devel: Add CPE information
Approved by: portmgr (blanket)
|
|
Tue, 27 Jul 2021
|
[ 18:55 Loïc Bartoletti (lbartoletti) ] 8b9c482 (Only the first 10 of 49 ports in this commit are shown above. )
*/*: PyQt Update qscintilla2 to 2.13.0 and py-qt5-sip to 12.9.0
Changes:
- https://riverbankcomputing.com/news/QScintilla_2.13.0_Released
- https://www.riverbankcomputing.com/hg/sip/raw-file/tip/NEWS
PR: 257308
Exp-run by: antoine
|
|
Mon, 12 Jul 2021
|
[ 12:36 Loïc Bartoletti (lbartoletti) ] 9713ff9 (Only the first 10 of 46 ports in this commit are shown above. )
devel/qscintilla2: Update to 2.12.1
Changelog:
https://riverbankcomputing.com/news/QScintilla_2.12.1_Released
PR: 257002
Exp-run by: antoine
|
|
Tue, 22 Jun 2021
|
[ 18:53 Kevin Bowling (kbowling) ] da3162c (Only the first 10 of 914 ports in this commit are shown above. )
graphics/mesa-libs: Bump reverse deps for libglvnd
Per discussion with bapt on helping pkg handle the changing of these
deps and avoiding impossible upgrade senarios.
PR: 246767
Reviewed by: manu, bapt
Approved by: x11
Differential Revision: https://reviews.freebsd.org/D30824
|
|
Thu, 17 Jun 2021
|
[ 04:51 Loïc Bartoletti (lbartoletti) ] 6d6c552 (Only the first 10 of 11 ports in this commit are shown above. )
math/cgal: Update to 5.2.1
- Remove files/patch-CMakeLists.txt
- Remove LD_CONFIG and move USES (pet porlint)
- Bump ports
Changes:
- https://www.cgal.org/2021/03/17/cgal521/
- https://www.cgal.org/2020/12/22/cgal52/
PR: 255171
Approved by: wen
|
|
Mon, 19 Apr 2021
|
[ 08:00 Tobias Kortkamp (tobik) ] 1bf865f (Only the first 10 of 52 ports in this commit are shown above. )
Clean up all commented PORTREVISION and PORTEPOCH lines
No revision bump tool that we have cleans them up or deals with
them, so we end up with duplicated lines. Instead of implementing
that just clean up the 51 ports that do this.
PORTREVISION and PORTEPOCH can be set to 0 explicitly instead if
you need a reminder or placeholder.
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Tue, 16 Mar 2021
|
[ 09:29 lbartoletti ]   (Only the first 10 of 57 ports in this commit are shown above. )
PyQt5: Update PyQt5 to 5.15.4 and py-qtbuilder to 1.9.1
PR: 254218
Exp-run by: antoine
|
|
Mon, 8 Mar 2021
|
[ 06:49 lbartoletti ] (Only the first 10 of 100 ports in this commit are shown above. )
PyQt5: Update PyQt5 to 5.15.3, QScintilla2 to 2.12.0, py-qtbuilder to 1.9.0
* PyQt5: update to 5.15.3
This is a minor feature and bug-fix release. There are corresponding releases of
the other PyQt5-related packages.
- Added the missing QImage.setAlphaChannel().
- Support for the QtNetworkAuth library has been moved to a separate
PyQtNetworkAuth package.
- Wheels no longer bundle the corresponding Qt libraries and instead
automatically install them from an external wheel.
* QScintilla2: update to 2.12.0
This adds support for Qt6 and removes support for Qt4.
- Change the new distname (again)i due to a conflict
- Use the new sip-build system
* devel/py-qtbuilder: update to 1.9.0
* devel/py-sip: fix flavor for sip-distinfo
PR: 253865
Exp-run by: antoine
|
|
Tue, 9 Feb 2021
|
[ 21:46 mr ]
Update openscad to 2021.01 and openscad-devel to the latest commit
|
|
Mon, 18 Jan 2021
|
[ 19:03 lbartoletti ] (Only the first 10 of 44 ports in this commit are shown above. )
Update qscintilla2 to 2.11.6
|
|
Sat, 12 Dec 2020
|
[ 17:04 thierry ] (Only the first 10 of 80 ports in this commit are shown above. )
- Upgrade math/eigen3 to 3.3.8;
- Add some dependencies which might be detected by Find_Package but not
registered;
- Bump PORTREVISION of consumers.
PR: 250833
Submitted by: /me
Approved by: tcberner@ (KDE / maintainer) + exp-run
|
|
Mon, 5 Oct 2020
|
[ 15:50 lbartoletti ] (Only the first 10 of 122 ports in this commit are shown above. )
Update PyQt to 5.15.0, py-sip to 4.19.24 and qscintilla2 to 2.11.5
- Update PyQt to 5.15.0, py-sip to 4.19.24 and qscintilla2 to 2.11.5
- Use pypi for PYQT [1]
- Add devel/py-qt5-sip (Don't use it for now. It will be used in future updates
of PyQt with py-sip >= 5)
- Add missing py-qt5 ports: comms/py-qt5-sensors, devel/py-qt5-location,
devel/py-qt5-remoteobjects, net/py-qt5-networkauth
- Strip libs
- Refactor *_PATH and *_PORT parts
[1] RiverBankComputing doesn't offer links to download latest version of some
ports
PR: 247369
Reviewed by: tcberner
Differential Revision: https://reviews.freebsd.org/D25749
Exp-run by: antoine
|
|
Fri, 8 May 2020
|
[ 05:35 lbartoletti ] (Only the first 10 of 19 ports in this commit are shown above. )
smath/cgal: Update to 5.0.2
The new version of CGAL brings improvements and a lot of changes, including 2
major ones [1](header only[2] and require c++14) requiring to patch all software
depending on it.
[1] https://www.cgal.org/2019/11/08/cgal50/
[2] https://doc.cgal.org/latest/Manual/installation.html
math/cgal:
- Update to 5.0.2
databases/sfcgal:
- Fix with cgal5 : use c++14 and add gmpxx link
(Only the first 15 lines of the commit message are shown above )
|
|
Sat, 11 Apr 2020
|
[ 05:04 lbartoletti ] (Only the first 10 of 67 ports in this commit are shown above. )
Update py-sip to 4.19.21 and qscintilla2 to 2.11.4
- Update py-sip to 4.19.21
- Update qscintilla2 to 2.11.4
- Replace MASTER_SITE_RIVERBANK with https versions
- Replace QSCI2_DISTNAME to match with the new one
PR: 245308
Approved by: tcberner (mentor)
Exp-run by: antoine
|
|
Sun, 12 Jan 2020
|
[ 18:35 mr ]
Update to latest commit from 2020.01.04
|
|
Wed, 11 Dec 2019
|
[ 17:53 jbeich ] (Only the first 10 of 417 ports in this commit are shown above. )
devel/boost-*: update to 1.72.0
Changes: http://www.boost.org/users/history/version_1_72_0.html
PR: 241449
Exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D22136
|
|
Mon, 4 Nov 2019
|
[ 21:36 zeising ] (Only the first 10 of 43 ports in this commit are shown above. )
Add USES=xorg USES=gl, ports categories c
Add USES=xorg, USES=gl and in a few cases USES=gnome to ports in categories
starting with 'c'.
|
|
Fri, 25 Oct 2019
|
[ 15:41 jbeich ]
cad/openscad: unbreak with boost 1.72
src/parser.y:68:6: error: no template named 'stack' in namespace 'std'
std::stack<LocalScope *> scope_stack;
~~~~~^
|
|
Fri, 6 Sep 2019
|
[ 09:59 mr ]
Update to 2019.09.05
|
|
Mon, 19 Aug 2019
|
[ 15:35 jbeich ] (Only the first 10 of 412 ports in this commit are shown above. )
devel/boost-*: update to 1.71.0
Changes: http://www.boost.org/users/history/version_1_71_0.html
PR: 238827
Exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D20774
|
|
Sun, 4 Aug 2019
|
[ 17:15 yuri ]
devel/double-conversion: Update 3.0.0 -> 3.1.5-11
Maintainer reset due to the extended timeout, as per policy.
Take maintainership.
7 ports are bumped.
PR: 239367
Approved by: waitman@waitman.net (maintainer's timeout; ~6months on a PR#235789
for the same port)
|
|
Fri, 26 Jul 2019
|
[ 20:46 gerald ] (Only the first 10 of 3853 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
|
|
Fri, 12 Apr 2019
|
[ 06:36 jbeich ] (Only the first 10 of 392 ports in this commit are shown above. )
devel/boost-*: update to 1.70.0
Changes: http://www.boost.org/users/history/version_1_70_0.html
PR: 235956
Exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D19303
|
|
Fri, 5 Apr 2019
|
[ 10:44 mr ]
Update to latest version from 2019.04.04 and fix pkg-plist to fix build errors.
PR: 237015
|
|
Wed, 6 Feb 2019
|
[ 20:35 mr ]
Update to 2019.02.05
|
|
Wed, 16 Jan 2019
|
[ 11:13 tijl ] (Only the first 10 of 1089 ports in this commit are shown above. )
Fix Qt5 symbol version scripts to put the catch-all clause first. When
a symbol matches multiple clauses the last one takes precedence. If the
catch-all is last it captures everything. In the case of Qt5 libraries
this caused all symbols to have a Qt_5 label while some should have
Qt_5_PRIVATE_API. This only affects lld because GNU ld always gives the
catch-all lowest priority.
Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium. Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3] The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one. If there's no such non-weak symbol the call (Only the first 15 lines of the commit message are shown above )
|
|
Wed, 26 Dec 2018
|
[ 09:06 tcberner ] (Only the first 10 of 48 ports in this commit are shown above. )
Update math/eigen3 to 3.3.7
- http://eigen.tuxfamily.org/index.php?title=ChangeLog#Eigen_3.3.6
- http://eigen.tuxfamily.org/index.php?title=ChangeLog#Eigen_3.3.7
|
|
Wed, 12 Dec 2018
|
[ 01:35 gerald ] (Only the first 10 of 3168 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
|
[ 00:15 jbeich ] (Only the first 10 of 415 ports in this commit are shown above. )
devel/boost-*: update to 1.69.0
Changes: http://www.boost.org/users/history/version_1_69_0.html
PR: 232525
Exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D17645
|
|
Thu, 25 Oct 2018
|
[ 16:26 mr ]
Update 2018.10.22:
Unbreak with Boost 1.69
Drop dependency on -lcompat
Replace time.h with ctime
PR: 232516
Submitted by: Jan Beich jbeich@
|
|
Tue, 11 Sep 2018
|
[ 18:34 zeising ] (Only the first 10 of 331 ports in this commit are shown above. )
Change x11/xorgproto to become a build dep
Change x11/xorgproto to become a build time dependency when added to
USE_XORG. Change the dependency to be on the port, rather than a file the
port installs.
Fix fallout.
Bump portrevision on depending ports.
PR: 230909
Reviewed by: eadler
Approved by: portmgr (antoine)
Obtained
from: https://github.com/FreeBSDDesktop/freebsd-ports/tree/feature/xorgproto
exp-run: antoine
Differential Revision: https://reviews.freebsd.org/D16906
|
|
Thu, 9 Aug 2018
|
[ 06:58 jbeich ] (Only the first 10 of 404 ports in this commit are shown above. )
devel/boost-*: update to 1.68.0
- Switch to C++14 for libboost_system to support C++14 consumers
Changes: http://www.boost.org/users/history/version_1_68_0.html
PR: 229569
Exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D16165
|
|
Sun, 29 Jul 2018
|
[ 22:18 gerald ] (Only the first 10 of 1480 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
|
|
Thu, 28 Jun 2018
|
[ 17:39 tcberner ] (Only the first 10 of 1416 ports in this commit are shown above. )
Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk
From now on, ports that depend on Qt4 will have to set
USES= qt:4
USE_QT= foo bar
ports depending on Qt5 will use
USES= qt:5
USE_QT= foo bar
PR: 229225
Exp-run by: antoine
Reviewed by: mat
Approved by: portmgr (antoine)
Differential Revision: -https://reviews.freebsd.org/D15540
|
|
Fri, 11 May 2018
|
[ 17:44 amdmi3 ]
- Whitespace fix
Approved by: portmgr blanket
|
|
Mon, 7 May 2018
|
[ 22:29 jbeich ] (Only the first 10 of 27 ports in this commit are shown above. )
Drop FreeBSD 10.3 support
Reviewed by: yuri (SoPlex), sunpoet (nghttp2), cpm (chromium), brooks (llvm*)
Approved by: portmgr (rene)
Differential Revision: https://reviews.freebsd.org/D15238
|
|
Sun, 29 Apr 2018
|
[ 16:19 tcberner ] (Only the first 10 of 65 ports in this commit are shown above. )
Update the QScintilla2 ports to 2.10.4
|
|
Sat, 28 Apr 2018
|
[ 14:19 mr ]
Reenable for FreeBSD >= 10.4
Use the CONFIG argument to enable experimental features
Submitted by: jbeich@
|
|
Wed, 25 Apr 2018
|
[ 16:29 mr ]
Enable experimental features.
Make portlint happy.
Mark Broken for FreeBSD 10 due to compile/link error.
|
|
Sun, 22 Apr 2018
|
[ 18:14 mr ]
Add openscad-devel as of 2018.04.19
PR: 227581
|
Number of commits found: 59 |
As an Amazon Associate I earn from qualifying purchases.