| non port: cad/cura/Makefile |
|
SVNWeb
|
Number of commits found: 25 |
|
Thu, 9 Mar 2023
|
[ 11:15 Loïc Bartoletti (lbartoletti)  ]    6d3a647 (Only the first 10 of 74 ports in this commit are shown above.  )
PyQt: Update to latest versions
- PyQt5: update to 5.15.9
- PyQt6: upate to 6.4.2
- PyQt6-sip: update to 13.4.1
- PyQt5-sip: update to 12.11.1
- PyQt-builder: update to 1.14.1
- sip: upate to 6.7.7
PR: 269751
Exp-run by: antoine
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Sat, 13 Aug 2022
|
[ 18:51 Matthias Andree (mandree) ] 875d7c7 (Only the first 10 of 63 ports in this commit are shown above. )
*: bump PORTREVISION of all devel/xxhash users...
...except archivers/py-borgbackup, which requires a more complete fix.
|
|
Thu, 4 Aug 2022
|
[ 22:52 Diane Bruce (db) ] 0628704 (Only the first 10 of 25 ports in this commit are shown above. )
ports/cura: Update to 4.13.1
Major update to 4.13.1 not 4.12
I've said it before and I'll say it again. This port should be a
group effort but a cads porting team. I'd be happy to give
up Maintainership as my only interest with cura was to get it into
ports.
PR: ports/255630
Reported by: unrelentingtech <greg@unrelenting.technology>
Tested by: trombik1973@gmail.com
|
|
Mon, 7 Mar 2022
|
[ 17:39 Loïc Bartoletti (lbartoletti) ] 2d8f8573 (Only the first 10 of 75 ports in this commit are shown above. )
devel/py-qt5, devel/py-sip: Update versions
- Update sip to 6.5.1
- Update PyQt5 to 5.15.6
- Update PyQtChart, PyQtNetworkAuth and PyQtWebengine to 5.15.5
- Update PyQtSip to 12.9.1
- Update PyQtBuilder to 1.12.2
- Add ${_MAKE_JOBS} for pyqt.mk (reported by Tatsuki Makino)
PR: 261685
Exp-run by: antoine
|
|
Thu, 27 Jan 2022
|
[ 06:12 Loïc Bartoletti (lbartoletti) ] 4f0a5e1 (Only the first 10 of 205 ports in this commit are shown above. )
PyQt: Update sip to 6.5.0, reintroduce sip4 and simplify PyQt framework.
SIP:
As mentioned in the update from sip to sip5, this is a transitional version
to remove what is deprecated in sip4.
Sip6 completely removes the deprecated parts.
Unfortunately, some ports — mostly cura things — can not use sip6, so we
reintroduce sip4.
PyQt:
At the same time, we took the opportunity to simplify PyQT and propose only one
package as for devel/pyside2. */py-qt5-* have been merged — excepted chart,
networkauth and webengine — into devel/py-qt5-pyqt.
This allows us to be in adequacy with the packages that the author of these (Only the first 15 lines of the commit message are shown above )
|
|
Wed, 7 Apr 2021
|
[ 08:09 Mathieu Arnold (mat) ] cf118cc (Only the first 10 of 8873 ports in this commit are shown above. )
One more small cleanup, forgotten yesterday.
Reported by: lwhsu
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Tue, 16 Mar 2021
|
[ 09:29 lbartoletti ]   (Only the first 10 of 57 ports in this commit are shown above. )
PyQt5: Update PyQt5 to 5.15.4 and py-qtbuilder to 1.9.1
PR: 254218
Exp-run by: antoine
|
|
Mon, 8 Mar 2021
|
[ 06:49 lbartoletti ] (Only the first 10 of 100 ports in this commit are shown above. )
PyQt5: Update PyQt5 to 5.15.3, QScintilla2 to 2.12.0, py-qtbuilder to 1.9.0
* PyQt5: update to 5.15.3
This is a minor feature and bug-fix release. There are corresponding releases of
the other PyQt5-related packages.
- Added the missing QImage.setAlphaChannel().
- Support for the QtNetworkAuth library has been moved to a separate
PyQtNetworkAuth package.
- Wheels no longer bundle the corresponding Qt libraries and instead
automatically install them from an external wheel.
* QScintilla2: update to 2.12.0
This adds support for Qt6 and removes support for Qt4.
- Change the new distname (again)i due to a conflict
- Use the new sip-build system
* devel/py-qtbuilder: update to 1.9.0
* devel/py-sip: fix flavor for sip-distinfo
PR: 253865
Exp-run by: antoine
|
|
Mon, 22 Feb 2021
|
[ 21:34 db ]
Just to add to the mix here (I can open a new ticket if you prefer):
Missing dependency: py37-qt5-svg (Icons render as black squares without it.)
- db Yes this should have been a separate PR :-) closing PR now
PR: ports/251236
Reported by: eborisch+FreeBSD@gmail.com
|
|
Mon, 18 Jan 2021
|
[ 23:30 db ]
I inadvertantly deleted a line while merging in patches. *sigh*
PR: ports/251236
Reported by: Torfinn Ingolfsen <tingox+freebsd@gmail.com>
|
|
Sat, 16 Jan 2021
|
[ 16:25 db ]
Finally update cura now that all prequisite ports are updated.
PR: ports/251236
|
|
Mon, 28 Dec 2020
|
[ 01:25 db ]
the port uses USE_GITHUB=yes, yet the commit did not change GH_TAGNAME.
the package is still 4.7. as a proof, SHA256 in distinfo is identical.
confusingly, the version in "About" says "master", not 4.8 nor 4.7.
this PR should be reopened. (Tomoyuki Sakura)
Apparently I forgot to remove a line causing the wrong cura version
to be claimed as an update to 4.8
I think I have it right this time. Apologies I should have noticed.
I'll take the pointyhat and go sit in the corner.
PR: ports/251236
Submitted by: sko@rostwald.de
Reported by: trombik1973@gmail.com
|
|
Tue, 15 Dec 2020
|
[ 17:56 lbartoletti ] (Only the first 10 of 54 ports in this commit are shown above. )
Update PyQt5 to 5.15.2, sip to 5.5.0, py-qtbuilder to 1.6.0 and py-qt5-sip to
12.8.1
PR: 251764
Exp-run by: antoine
|
|
Tue, 8 Dec 2020
|
[ 20:03 lbartoletti ] (Only the first 10 of 136 ports in this commit are shown above. )
Update Qt/PySide2 to 5.15.2 / PyQt to 5.15.1 / SIP to 5.4.0
This commit combines several updates.
- Update Qt to 5.12.2
- Update PyQt to 5.15.1
- Since PySide 5.15.1 is broken with Qt 5.15.2, so PySide and Shiboken are also
updated to 5.15.2.
- Update sip to 5.4.0
SIP is a collection of tools to create Python bindings for C and C++ libraries
and used by PyQt and wxPython. There are some changes with sip5 [1]:
- python 3.5+ is required
- sip drops support of old deprecated methods as sipdistutils & cie.
- this version breaks also PyQt5 extension ABI. SIP files will be installed in
${PYTHON_SITELIBDIR}/PyQt${_PYQT_VERSION}/bindings
- some ports will use the new pyqtbuilder package with the pyproject.toml setup.
Instead if the project have a setup.py, you should use sip-build to build it.
- if a port needs sip, it should also needs pysip. BTW, py-qt5-core requires
pysip, so that should be enough for PyQt packages.
(Only the first 15 lines of the commit message are shown above )
|
|
Fri, 20 Nov 2020
|
[ 23:03 db ]
From PR:
In Cura version 4.7 a bug regarding slowdowns in circular perimeters was
introduced (or at list gets triggered much more easily than in earlier
versions):
https://github.com/Ultimaker/Cura/issues/8321
This issue makes v4.7.x hardly usable.
Sticking to v4.5 has become quite "tricky" to say the least, due to
the massive python-induced dependency hell and lots of dependencies
being too new and/or incompatible for the 4.5 version.
Version 4.8 has been released on November 10 that fixes this glitch in
the simplification algorithm. The issue is still open, but is considered
to be solved with 4.8 and changed default settings for Maximum resolution (Only the first 15 lines of the commit message are shown above )
|
|
Sat, 26 Sep 2020
|
[ 19:53 db ] (Only the first 10 of 17 ports in this commit are shown above. )
This patch updates Cura and all associated dependencies to 4.7.1.
Also, it adds math/py-numpy-stl - an optional dependency that makes
loading STL files much faster. Without it, Cura was complaining:
2020-09-20 02:19:31,877 - WARNING - [MainThread] STLReader.STLReader.<module>
[32]: Could not find numpy-stl, falling back to slower code.
I'm not sure where the 6.x version in cad/fdm_materials came from, seems
like now that project has its version in sync with the Cura version,
so I chose to increment PORTEPOCH for that. [Greg]
- fdm_materials adds some new materials usable with Cura
- I had to bump PORTEPOCH on a couple of ports
- py-numpy-stl was added on a separate commit
- Bump version checking in Cura on some dependancies
[db]
PR: ports/249468
Submitted by: greg@unrelenting.technology
|
|
Fri, 24 Jul 2020
|
[ 20:09 db ]
The serial library returns 'n/a' to the port[2] string that Cura was checking
for starting with 'USB' (which would actually be 'U' for us). I guess
somewhere it is only splitting on 'tty' and not 'cua'. Well, let's just
not filter serial ports for USB for now.
PR: ports/248227
Submitted by: greg@unrelenting.technology
|
|
Sat, 27 Jun 2020
|
[ 09:37 sunpoet ] (Only the first 10 of 21 ports in this commit are shown above. )
Move comms/py-serial to comms/py-pyserial
- While I'm here, add NO_ARCH
- Bump PORTREVISION of dependent ports for dependency change
(devel/py-pyvisa-py and finance/odoo will be bumped in next commit, py-pyusb
renaming)
PR: 246546
Submitted by: sunpoet (myself)
Approved by: maintainer (timeout, 40 days)
|
|
Sun, 12 Apr 2020
|
[ 23:04 db ]
Although qt5-quickcontrols2 is already a dependency,
qt5-quickcontrols is needed.
PR: ports/245581
Submitted by: meka@tilda.center
|
|
Tue, 7 Apr 2020
|
[ 16:03 tobik ]
Clean up some duplicated variables
Reported by: portscan
|
|
Fri, 27 Mar 2020
|
[ 13:08 db ]
I was confused by the jump back in version numbering but got the proper
commit number after the proper 4.5 tag did an unneeded EPOCH bump
(Thinking I was working on CuraEngine) and then managed to leave the
wrong tag 14.5 instead of 4.5 in the version. (Porter Handbook 5.14)
I'll wear the pointy hat.
Mop up the RUN_DEPENDS I missed as noted by lme@ via email.
===
I made it work on my machine but there were a few missing runtime
dependencies:
- cad/cura-engine
- comms/py-serial
- graphics/qt-graphicaleffects
- x11-toolkits/qt-quickcontrols2
After I installed the packages manually Cura starts successfully. :-)
===
Reported by: lme@FreeBSD.org
|
|
Thu, 26 Mar 2020
|
[ 12:06 db ]
I used my personal email rather than FreeBSD one by mistake
No binary changes.
|
[ 00:03 db ]
This is the new, shiny frontend for Cura. Check daid/LegacyCura for the
legacy Cura that everyone knows and loves/hates. We re-worked the
whole GUI code at Ultimaker, because the old code started to become
unmaintainable.
WWW: https://github.com/Ultimaker/Cura/wiki
|
Number of commits found: 25 |
As an Amazon Associate I earn from qualifying purchases.