| non port: cad/cura-engine/distinfo |
|
SVNWeb
|
Number of commits found: 7 |
|
Thu, 4 Aug 2022
|
[ 22:52 Diane Bruce (db)  ]    0628704 (Only the first 10 of 25 ports in this commit are shown above.  )
ports/cura: Update to 4.13.1
Major update to 4.13.1 not 4.12
I've said it before and I'll say it again. This port should be a
group effort but a cads porting team. I'd be happy to give
up Maintainership as my only interest with cura was to get it into
ports.
PR: ports/255630
Reported by: unrelentingtech <greg@unrelenting.technology>
Tested by: trombik1973@gmail.com
|
|
Sat, 21 Nov 2020
|
[ 00:33 db ]  
Update to 4.8
A few improvements from upstream
- More efficient triangle area calculation
- Calculate vSize(vap) only when needed
|
|
Sat, 26 Sep 2020
|
[ 19:53 db ] (Only the first 10 of 17 ports in this commit are shown above. )
This patch updates Cura and all associated dependencies to 4.7.1.
Also, it adds math/py-numpy-stl - an optional dependency that makes
loading STL files much faster. Without it, Cura was complaining:
2020-09-20 02:19:31,877 - WARNING - [MainThread] STLReader.STLReader.<module>
[32]: Could not find numpy-stl, falling back to slower code.
I'm not sure where the 6.x version in cad/fdm_materials came from, seems
like now that project has its version in sync with the Cura version,
so I chose to increment PORTEPOCH for that. [Greg]
- fdm_materials adds some new materials usable with Cura
- I had to bump PORTEPOCH on a couple of ports
- py-numpy-stl was added on a separate commit
- Bump version checking in Cura on some dependancies
[db]
PR: ports/249468
Submitted by: greg@unrelenting.technology
|
|
Thu, 26 Mar 2020
|
[ 00:22 db ]
- Maintainer timeout after 4 months take Maintainership
Reported: 2019-11-26 03:43 UTC by Kyle Evans
Modified: 2020-03-11 21:02 UTC (History)
Total new update to CuraEngine
Cura saw a major rewrite between 15.04 and 4.3.0, hence the need for
PORTEPOCH -- the changeset is too large to enumerate. At a minimum,
the new version solves some issues that users will see attempting to
slice .stl files created from newer Blender versions.
A new port, libArcus, is also included -- this is a prereq for the new
version of Cura and will also be needed for the UI if it's eventually ported.
PR: ports/242242
|
|
Wed, 5 Aug 2015
|
[ 15:36 robak ]
cad/cura-engine: update 14.03 -> 15.04
- Drop obsolete GH_TAGNAME
- Remove pkg-plist and use PLIST_FILES
PR: 201692
Submitted by: Tomek Cedro <cederom@tlen.pl> (maintainer)
|
|
Wed, 6 May 2015
|
[ 15:16 mat ] (Only the first 10 of 348 ports in this commit are shown above. )
Update ports in the [bcd]* categories to not use GH_COMMIT.
With minor cleanups to make things simpler.
With hat: portmgr
Sponsored by: Absolight
|
|
Fri, 8 Aug 2014
|
[ 01:28 wg ]
cad/cura-engine: Engine of slicing solution for RepRap 3D printers
The CuraEngine is a C++ console application for 3D printing GCode generation.
It has been made as better and faster alternative to the old Skeinforge engine.
The CuraEngine is pure C++ and uses Clipper from
http://www.angusj.com/delphi/clipper.php. There are no external dependences
and Clipper is included in the source code without modifications.
This is just a console application for GCode generation. For a full graphical
application look at https://github.com/daid/Cura with is the graphical
frontend for CuraEngine.
The CuraEngine can be used seperately or in other applications.
Feel free to add it to your application. But to take note of the License.
WWW: http://wiki.ultimaker.com/Cura
PR: 192486
Submitted by: cederom tlen pl
|
Number of commits found: 7 |
As an Amazon Associate I earn from qualifying purchases.