21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

14:20 Tobias C. Berner (tcberner) 

biology: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Andrey Zakhvatov
  *  Bob Zimmermann <rpz@cse.wustl.edu>
  *  Camson Huynh <chuynh@biolateral.com.au>
  *  Dan Siercks <dsiercks@uwm.edu>
  *  Fernan Aguero <fernan@iib.unsam.edu.ar>
  *  Hannes Hauswedell <h2+fbsdports@fsfe.org>
  *  J. Bacon <jwb@FreeBSD.org>
  *  Jason Bacon <jwb@FreeBSD.org>
  *  Jeremy <karlj000@unbc.ca>
  *  Johann Visagie <johann@egenetics.com>
  *  Johann Visagie <wjv@FreeBSD.org>
  *  Mauricio Herrera Cuadra <mauricio@arareko.net>
  *  Motomichi Matsuzaki <mzaki@biol.s.u-tokyo.ac.jp>
  *  Motomichi Matsuzaki <mzaki@e-mail.ne.jp>
  *  Motomichi Matsuzaki <mzaki@m.u-tokyo.ac.jp>
  *  Motomichi Matsuzaki <mzaki@niid.go.jp>
  *  Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Razi Khaja <razi@genet.sickkids.on.ca>
  *  Reed A. Cartwright <cartwright@asu.edu>
  *  Ryo MIYAMOTO
  *  Ryo MIYAMOTO <rmiya@cc.hirosaki-u.ac.jp>
  *  Sangwoo Shim <sangwoos@gmail.com>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Tassilo Philipp <tphilipp@potion-studios.com>
  *  Tony Maher
  *  Tony Maher <tonym@biolateral.com.au>
  *  Wen Heping <wen@FreeBSD.org>
  *  Wen Heping <wenheping@gmail.com>
  *  Yonatan <onatan@gmail.com>
  *  Yuri Victorovich <yuri@rawbw.com>
  *  ballen
  *  barnhart@genetics.wustl.edu
  *  camson@bilateral.com.au
  *  chuynh@biolateral.com.au
  *  dbader@eece.unm.edu
  *  frankch@waru.life.nthu.edu.tw
  *  h2
  *  lentferj
  *  maho@FreeBSD.org
  *  mzaki@biol.s.u-tokyo.ac.jp
  *  tonym
  *  wen@FreeBSD.org

With hat:	portmgr

    37526bb

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

18:09 danfe 

- Convert to option helper install target (add OPTIONS_DEFINE=DOCS
  when it was missing)
- Invoke INSTALL_DATA where appropriate instead of INSTALL_MAN
- Fix some whitespace and formatting bugs along the way

 

17:43 marino 

Designatate 4 ports as unsafe for parallel building

All had similar errors that it couldn't find something during the build,
yet built on a subsequent pass with no adjustments.  Most I've seen before
on previous bulk runs.

 

13:08 mat 

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the
Perl version, minimizing the upgrade when the major Perl version is changed.
It uses a version dependent directory for modules with compiled bits.

As PERL_ARCH is no longer needed in plists, it has been removed from
PLIST_SUB.

The USE_PERL5=fixpacklist keyword is removed, the .packlist file is now
always removed, as is perllocal.pod.

The old site_perl and site_perl/arch directories have been kept in the
default Perl @INC for all Perl ports, and will be phased out as these old
Perl versions expire.

PR:		194969
Differential Revision:	https://reviews.freebsd.org/D1019
Exp-run by:	antoine
Reviewed by:	perl@
Approved by:	portmgr

 

07:38 mva 

- Convert ports from benchmarks/ and biology/ to new USES=python

Approved by:	portmgr (implicit)

 

19:11 adamw 

Convert a bunch of EXTRACT_SUFX=... into USES=tar:...

Approved by:	portmgr (not really, but touches unstaged ports)

 

12:54 rakuco 

Fix shebang line in Perl and Python scripts.

PR:		191146
Submitted by:	mzaki@m.u-tokyo.ac.jp (maintainer)

 

21:39 rakuco 

Update to 1.2.10.

PR:		191129
Submitted by:	mzaki@m.u-tokyo.ac.jp (maintainer)

 

11:33 ohauer 

- add stage support

 

07:41 miwi 

- Convert USE_GMAKE to USES

 

13:35 ehaupt 

Remove trailing whitespaces from category biology

 

13:54 ehaupt 

According to the Porter's Handbook (5.12.2.3.) default options must be added to
OPTIONS_DEFINE. This policy has been implemented only recently that's why we
have many ports violating this policy.

This patch adds the default options specified in the Porter's Handbook to
OPTIONS_DEFINE where they are being used. Ports maintained by
gnome@FreeBSD.org, kde@FreeBSD.org and x11@FreeBSD.org have been excluded.

Approved by:    portmgr (bapt)

 

15:46 adamw 

Convert biology to MDOCS and MEXAMPLES

 

15:55 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
biology)

 

07:44 az 

- convert to the new perl5 framework

Approved by:	portmgr (bapt@, blanket)

 

16:33 jlaffaye 

Update to 1.1.04

PR:             ports/157527
Submitted by:   Motomichi Matsuzaki <mzaki@m.u-tokyo.ac.jp>
Approved by:    bapt (mentor)

01:23 amdmi3 

Velvet is a de novo genomic assembler specially designed for short read
sequencing technologies, such as Solexa or 454, developed by Daniel Zerbino
and Ewan Birney at the European Bioinformatics Institute (EMBL-EBI).

Citation:

Velvet: algorithms for de novo short read assembly using de Bruijn graphs.
D.R. Zerbino and E. Birney. Genome Research 18: 821-829 (2008)

WWW: http://www.ebi.ac.uk/~zerbino/velvet/

PR:             140147
Submitted by:   Motomichi Matsuzaki <mzaki@m.u-tokyo.ac.jp>