21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

14:20 Tobias C. Berner (tcberner) 

benchmarks: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Alexander Logvinov <ports@logvinov.com>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alexey V. Degtyarev
  *  Andreas Kohn <andreas@syndrom23.de>
  *  Andrew Shevtsov <nyxo@dnuc.polyn.kiae.su>
  *  Andrey Zakhvatov <andy@FreeBSD.org>
  *  Andy Clark <andrewclarkii@gmail.com>
  *  Antonio Carlos Venancio Junior (<antonio@inf.ufsc.br>)
  *  Bill Fumerola <billf@chc-chimes.com>
  *  Brad Davis <brd@FreeBSD.org>
  *  Bruce A. Mah <bmah@FreeBSD.org>
  *  Chao Shin <quakelee@cn.freebsd.org>
  *  Danilo Egea Gondolfo <danilo@FreeBSD.org>
  *  David O'Brien (obrien@FreeBSD.org)
  *  David O'Brien (obrien@NUXI.com)
  *  Dima Sivachenko <dima@chg.ru>
  *  Gabriel M. Dutra <0xdutra@gmail.com>
  *  Gea-Suan Lin <gslin@ccca.nctu.edu.tw>
  *  Gea-Suan Lin <gslin@gslin.org>
  *  Hannes Hauswedell <h2+fbsdports@fsfe.org>
  *  Johannes Dieterich <dieterich@ogolem.org>
  *  Johannes Dieterich <jmd@FreeBSD.org>
  *  Joseph Koshy <jkoshy@FreeBSD.org>
  *  Kris Moore <kmoore@FreeBSD.org>
  *  Lars Eggert <lars@eggert.org>
  *  Mark Pulford <mark@kyne.com.au>
  *  Matthias Fechner <mfechner@FreeBSD.org>
  *  NAKAJI Hiroyuki <nakaji@jp.freebsd.org>
  *  NAKATA Maho <maho@FreeBSD.org>
  *  Oliver Lehmann <oliver@FreeBSD.org>
  *  Pete Fritchman <petef@databits.net>
  *  Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Radim Kolar
  *  Radim Kolar <hsn@sendmail.cz>
  *  Roman Bogorodskiy <bogorodskiy@inbox.ru>
  *  Scott Flatman <sf@dsinw.com>
  *  Sergey A. Osokin <osa@FreeBSD.org>
  *  Sergey Kandaurov <pluknet@gmail.com>
  *  Sergey Skvortsov <skv@protey.ru>
  *  Slava Shwartsman <slavash@FreeBSD.org>
  *  Stephen Montgomery-Smith <stephen@math.missouri.edu>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Thomas Dreibholz <dreibh@iem.uni-due.de>
  *  Tom Judge <tom@tomjudge.com>
  *  Veniamin Gvozdikov <vg@FreeBSD.org>
  *  Vsevolod Stakhov <vsevolod@FreeBSD.org>
  *  Will Andrews <andrews@technologist.com>
  *  Yen-Ming Lee <leeym@FreeBSD.org>
  *  Ying-Chieh Liao <ijliao@FreeBSD.org>
  *  arved
  *  asami
  *  dikshie <dikshie@lapi.itb.ac.id>
  *  gnn
  *  ijliao
  *  janos.mohacsi@bsd.hu
  *  jesper@jdn.dk
  *  jmz
  *  koshy
  *  luigi@FreeBSD.org
  *  mharo@FreeBSD.org
  *  mich@freebsdcluster.org
  *  mr
  *  se
  *  shalunov
  *  thierry@pompo.net
  *  trasz <trasz@pin.if.uz.zgora.pl>
  *  uminac

With hat:	portmgr

    86b2c51

17:06 Jan Beich (jbeich) 

benchmarks/clpeak: update to 1.1.2

Changes:	https://github.com/krrishnarraj/clpeak/releases/tag/1.1.1
Changes:	https://github.com/krrishnarraj/clpeak/releases/tag/1.1.2
PR:		261764
Reported by:	GitHub (watch releases)
Approved by:	maintainer timeout (2 weeks)

    b44a116

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

21:07 jbeich 

benchmarks/clpeak: update to 1.1.0

Changes:	https://github.com/krrishnarraj/clpeak/compare/1.1.0-rc2...1.1.0
PR:		250562
Approved by:	jmd (maintainer)

 

14:03 jbeich 

benchmarks/clpeak: update to 1.1.0.r2

- Switch to vendor install
- Drop unused RUN_DEPENDS
- Allow on more architectures

Changes:	https://github.com/krrishnarraj/clpeak/compare/75c8746...1.1.0-rc2
Approved by:	maintainer timeout (2 weeks)
Differential Revision:	https://reviews.freebsd.org/D23821

 

21:08 zeising 

Add USES=xorg USES=gl, ports categories b

Add USES=xorg, USES=gl and in a few cases USES=gnome to ports in categories
starting with 'b'.

 

20:25 tcberner 

Change cmake default behaviour to outsource.

Ports that build out of source now simply can use "USES=cmake"
instead of "USES=cmake:outsource". Ports that fail to build
out of source now need to specify "USES=cmake:insource".

I tried to only set insource where explictely needed.

PR:		232038
Exp-run by:	antoine

 

10:29 mat 

Remove ONLY_FOR_ARCHS_REASON_<arch> that are not architecture dependant.

 

00:20 jmd 

benchmarks/clpeak: This brings clpeak to the latest git revision. FreeBSD
patches were upstreamed and it now supports fp16 tests. Changing mail address to
my FreeBSD one.

Reviewed by:	swills (mentor)
Approved by:	swills (mentor)
Differential Revision:	https://reviews.freebsd.org/D10917

 

05:03 rezny 

Revision bump of all ports with USE_GL after consolidation of mesa-libs

Approved by:	swills (mentor)
Differential Revision:	https://reviews.freebsd.org/D10845

 

03:45 sunpoet 

Remove BROKEN_FreeBSD_9

Approved by:	portmgr (blanket)

 

15:04 marino 

benchmarks/clpeak: set USE_GL rather than hardcoding LIB_DEPENDS

The proper way to handle libGL is to set USE_GL=gl, and doing so allows
dependency registration to match the port

Approved by:	infrastructure blanket (redundant deps work)

 

10:56 novel 

Add clpeak 1.0, benchmarking tool to measure peak capabilities of opencl
devices.

PR:		209849
Submitted by:	Johannes Dieterich <dieterich@ogolem.org>