non port: audio/spiralloops/Makefile |
SVNWeb
|
Number of commits found: 38 |
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
Wed, 20 Jul 2022
|
[ 14:20 Tobias C. Berner (tcberner) ] 213b0b7 (Only the first 10 of 561 ports in this commit are shown above. )
audio: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <dmagda+libsamplerate@ee.ryerson.ca>
* <trasz@FreeBSD.org>
* Adam Weinberger
* Adam Weinberger <adamw@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Aleksander Fafula <alex@bsdguru.org>
* Alex Allan <alex@kamaz.org.uk>
* Alexander Botero-Lowry <alex@foxybanana.com>
* Alexander Kojevnikov <alexander@kojevnikov.com>
* Alexander Nedotsukov <bland@FreeBSD.org>
* Alexander Vereeken <Alexander88207@protonmail.com> (Only the first 15 lines of the commit message are shown above )
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
Fri, 1 Apr 2016
|
[ 13:29 mat ] (Only the first 10 of 1009 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.
With hat: portmgr
Sponsored by: Absolight
|
Fri, 15 Jan 2016
|
[ 10:43 amdmi3 ]
- Clarify LICENSE
- Add LICENSE_FILE
- Switch to options helpers
|
Thu, 8 Oct 2015
|
[ 15:11 olgeni ] (Only the first 10 of 75 ports in this commit are shown above. )
Remove trailing whitespace from Makefiles, A-L.
|
Wed, 25 Mar 2015
|
[ 21:37 marino ] (Only the first 10 of 37 ports in this commit are shown above. )
audio category: Remove $PTHREAD_LIBS
xmcd didn't pass check-plist (pre-existing), fixed.
approved by: PTHREAD blanket
|
Wed, 10 Sep 2014
|
[ 20:50 gerald ] (Only the first 10 of 3171 ports in this commit are shown above. )
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
|
Mon, 17 Mar 2014
|
[ 22:03 pawel ]
- Use PLIST_FILES insted of dynamically generated plist
- Define DOCS option, use PORTDOCS for it, don't install COPYING file
- PTHREAD_CFLAGS is long gone, don't use it
- Add LICENSE, desktop entry file
- Support staging
|
Wed, 19 Feb 2014
|
[ 09:00 amdmi3 ]
- Fix build on 10.x
|
Fri, 3 Jan 2014
|
[ 15:26 adamw ] (Only the first 10 of 48 ports in this commit are shown above. )
Convert to PORT_OPTIONS:MDOCS.
Holdout shame list: ruby, perl, python
|
Wed, 11 Dec 2013
|
[ 14:35 bapt ] (Only the first 10 of 268 ports in this commit are shown above. )
In preparation for making libtool generate libraries with a sane name, fix all
LIB_DEPENDS in audio
With hat: portmgr
|
Fri, 20 Sep 2013
|
[ 14:36 bapt ] (Only the first 10 of 879 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
audio)
|
Sun, 27 Jan 2013
|
[ 05:55 tabthorpe ] (Only the first 10 of 71 ports in this commit are shown above. )
- Strip header at request of original creator
Submitted by: trevor
With hat: portmgr
|
Fri, 1 Jun 2012
|
[ 05:26 dinoex ] (Only the first 10 of 4371 ports in this commit are shown above. )
- update png to 1.5.10
|
Tue, 15 Nov 2011
|
[ 14:59 gahr ]
- Unbreak - fix build with latest x11-toolkits/fltk
Feature safe: yes
|
Fri, 4 Nov 2011
|
[ 22:16 pav ]
- Mark BROKEN: does not compile with new fltk
Reported by: pointyhat
|
Sun, 28 Mar 2010
|
[ 06:47 dinoex ] (Only the first 10 of 4470 ports in this commit are shown above. )
- update to 1.4.1
Reviewed by: exp8 run on pointyhat
Supported by: miwi
|
Tue, 23 Mar 2010
|
[ 21:14 gahr ] (Only the first 10 of 51 ports in this commit are shown above. )
- Chase x11-toolkits/fltk update
|
Fri, 5 Feb 2010
|
[ 11:46 dinoex ] (Only the first 10 of 4271 ports in this commit are shown above. )
- update to jpeg-8
|
Fri, 31 Jul 2009
|
[ 13:57 dinoex ] (Only the first 10 of 3009 ports in this commit are shown above. )
- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by: edwin
|
Sat, 19 Apr 2008
|
[ 17:56 miwi ] (Only the first 10 of 2842 ports in this commit are shown above. )
- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+
Thanks to all Helpers:
Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
ehaupt, nox, itetcu, flz, pav
PR: 116263
Tested on: pointyhat
Approved by: portmgr (pav)
|
Sat, 19 May 2007
|
[ 20:32 flz ] (Only the first 10 of 7868 ports in this commit are shown above. )
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
|
Wed, 22 Nov 2006
|
[ 20:45 miwi ] (Only the first 10 of 13 ports in this commit are shown above. )
- Unbreak
PR: ports/105744
Submitted by: trasz
|
Wed, 21 Jun 2006
|
[ 15:21 itetcu ]
portlint
PR: ports/99150
Submitted by: Alexander Botero-Lowry <alex@foxybanana.com>
|
Sat, 11 Feb 2006
|
[ 21:03 netchild ] (Only the first 10 of 103 ports in this commit are shown above. )
Reset maintainership to ports@ after ~4 months without any response to any
PR.
Thanks for contributing.
Since the acroread7 port is a somewhat important port for our users, I
will hand it over to emulation@ if no _active_ *committer* takes it
before the ports freeze.
While I'm here:
- fix a little nit in the csound port (I think the intention was to
create no backup file instead of creating one with a "-e" extension)
- set ARCH to i386 in the amd64 case for the acroread7 port. This
is a work-around to be able to install everything when a dependency
is not already installed (ARCH is read-only in sub-makes, so the
dependencies can't change it). This should be removed when the
dependencies are fixed or converted to use bsd.linux-rpm.mk. [1]
Not objected to by: portmgr (explicit: krion; silence: rest)
Maintainer timeout: ~4 months
Submitted by: Sangwoo Shim <sangwoos@gmail.com> [1]
PR: 87985 [1]
|
Sat, 12 Nov 2005
|
[ 11:58 pav ]
- Update MASTER_SITES, WWW
PR: ports/87939
Submitted by: Jean Milanez Melo <jmelo@freebsdbrasil.com.br>
Approved by: maintainer timeout (trevor; 19 days)
|
Mon, 27 Oct 2003
|
[ 09:11 kris ] (Only the first 10 of 35 ports in this commit are shown above. )
portlint (whitespace cleanup)
|
Sat, 4 Oct 2003
|
[ 14:50 trevor ]
Avoid Perl.
PR: 47651
Submitted by: Simon Schubert of ath.cx
Concatenate the two regexes in post-patch.
|
Wed, 4 Jun 2003
|
[ 22:43 kris ] (Only the first 10 of 129 ports in this commit are shown above. )
Move inclusion of bsd.port.pre.mk later in the file for conditional BROKEN
tag. Early inclusion caused problems for some ports, so to be safe I'm
updating all of them.
Pointy hat to: kris
|
Sun, 18 May 2003
|
[ 09:42 kris ]
BROKEN on 5.1: bad C++
|
Sat, 1 Mar 2003
|
[ 18:32 trevor ]
Because of Stephen Paskaluk's patches, this should no longer be
broken.
|
[ 14:42 trevor ]
These are not compatible with the new fltk.
Reported by: David Thiel
|
[ 14:34 trevor ] (Only the first 10 of 202 ports in this commit are shown above. )
Retire comment file.
|
Fri, 24 May 2002
|
[ 00:45 trevor ]
Update to 2.0.0.
Noticed by: Scott Dea
Use new DOCSDIR macro.
|
Tue, 29 Jan 2002
|
[ 09:33 knu ] (Only the first 10 of 11 ports in this commit are shown above. )
Use ${ECHO_CMD} instead of ${ECHO} where you mean the echo command; the ECHO
macro is set to "echo" by default, but it is set to "true" if make(1) is
invoked with the -s option while ECHO_CMD is always set to the echo command.
|
Wed, 29 Aug 2001
|
[ 06:42 trevor ]
Use PTHREAD_CFLAGS and PTHREAD_LIBS.
|
Sat, 24 Mar 2001
|
[ 02:54 trevor ]
new port of SpiralLoops 0.0.1, an experimental loop-based sampler
|
Number of commits found: 38 |