audio: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  <dmagda+libsamplerate@ee.ryerson.ca>
  *  <trasz@FreeBSD.org>
  *  Adam Weinberger
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Aleksander Fafula <alex@bsdguru.org>
  *  Alex Allan <alex@kamaz.org.uk>
  *  Alexander Botero-Lowry <alex@foxybanana.com>
  *  Alexander Kojevnikov <alexander@kojevnikov.com>
  *  Alexander Nedotsukov <bland@FreeBSD.org>
  *  Alexander Vereeken <Alexander88207@protonmail.com>

audio/rhythmbox: fix PYTHON option

While here, remove no longer used libmusicbrainz5, add USE_GNOME=gdkpixbuf2
from linkage detection and minor cleanups

Approved by: tcberner (mentor)
Differential Revision: https://reviews.freebsd.org/D35650

audio/rhythmbox: update to 3.4.6

Temporary disable the LIRC option it requires an update to lirc
whcih I cannot perform safely due to the lack of devices to test

framework: convert bsd.gstreamer.mk to Uses/gstreamer.mk

- convert bsd.gstreamer.mk to Uses/gstreamer.mk
- convert ports tree to make use of USES=gstreamer
- remove duplicate dependency lines from the tree

Differential Revision: https://reviews.freebsd.org/D35097

textproc/libxml2: bump all LIB_DEPENDS consumers

This is a separate commit to facilitate easier cherry-picking for
quarterly.

PR: 262853, 262940, 262877, 263126
Approved by: fluffy (mentor)

textproc/libxml2: bump all dependencies

This should make sure that all dependent ports will pick
up the new version commited with a13ec21cd733f67a9fc0dc00ab45268bdc236246

INSTALLS_ICONS: retire the macro and rework the related dependencies

While here, make sure gtk-update-icon-cache is only on run dependency
where added as a dependency
Enforce gtk3 to depend on gtk-update-icon-cache (previously it was
inheriting the dependency)

Remove # $FreeBSD$ from Makefiles.

audio/rhythmbox: fix plist

- Fix bad plist subs

PR:		253431
Reported by:	Olga Smirnova <mistresssilvara@hotmail.com>

Move rhythmbox to gnome@

Discussed with:	marcus (maintainer)

Fix build with non 3.7 version of python

Pointy hat:	bapt

Remove a false dependency on libhal in case MTP option is selected

Update to 3.4.4

comms/libimobiledevice: Update to 1.3.0
comms/libusbmuxd: Update to 2.0.2
comms/usbmuxd: Update to 1.1.1
devel/libplist: Update to 2.2.0

Resurrect comms/py-libimobiledevice, update to 1.3.0
Resurrect devel/py-libplist, update to 2.2.0

Take maintainership of the ports listed above.

Bump PORTREVISION on consumers and adjust LIB_DEPENDS to new versioned library
names.

audio/rhythmbox: fix plist

===> Checking for items in STAGEDIR missing from pkg-plist
Error: Orphaned: lib/rhythmbox/plugins/android/android.plugin
Error: Orphaned: lib/rhythmbox/plugins/android/libandroid.so

Update libsoup to 2.72.0

Merge back libsoup and libsoup-gnome, they both have the same dependencies
now, and they are more complicated to split now that they switched to meson

Bump portrevision of dependant ports

Add USES=xorg USES=gl, ports categories a

Add USES=xorg, USES=gl and in a few cases USES=gnome to ports in categories
starting with 'a'.

Switch back to non-legacy databases/tdb

Depend on legacy libtdb

Reported by:	pkg-fallout

Clean up plist

Update GStreamer to 1.14.4.

PR:		231406
Submitted by:	Greg V <greg@unrelenting.technology>
Exp-run by:	antoine
Approved by:	portmgr (antoine)

Bump PORTREVISION to chase update of multimedia/v4l_compat and libv4l

Change x11/xorgproto to become a build dep

Change x11/xorgproto to become a build time dependency when added to
USE_XORG.  Change the dependency to be on the port, rather than a file the
port installs.
Fix fallout.
Bump portrevision on depending ports.

PR:		230909
Reviewed by:	eadler
Approved by:	portmgr (antoine)
Obtained
from:	https://github.com/FreeBSDDesktop/freebsd-ports/tree/feature/xorgproto
exp-run:	antoine
Differential Revision:	https://reviews.freebsd.org/D16906

Add DOCS options to ports that should have one.

Also various fixes related to said option.

PR:		230864
Submitted by:	mat
exp-runs by:	antoine

Switch to xorgproto instead of individual packages

Upstream used to distribute protocol headers as separate packages, but has
decided to merge those to a common package, named xorgproto.  This update
tracks that change.

* Add a new port, x11/xorgproto, with are protocol headers for xorg.
* Hook the new protocol port to the build and to infrastructure in
  bsd.xorg.mk.
* Update all ports with a dependency on any of the old *proto packages to
  instead depend on xorgproto.  Bump portrevision.
* Delete the old *proto packages, update MOVED.

PR:		230023
Submitted by:	zeising
Approved by:	portmgr (antoine)
exp-run by:	antoine

Update to 3.4.2.

PR:		223303
Submitted by:	cpm

Cleanup Mk/Uses/gnome.mk.

- Remove the use of comp_DETECT.
- Remove all comp_DETECT variables.
- Remove a use of comp_DETECT outside of gnome.mk
- Remove py3gobject3.
- Have ports depending directly on devel/py-gobject3 use gnome to do it.

PR:		224618
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D13550

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the

Remove useless .pre.mk/.post.mk

svn copy grilo -> grilo2 and grilo-plugins -> grilo-plugins2

* These is done so grilo and grilo-plugins can be updated to 0.3.x and
  the users of grilo can switch when they are ready.
* Chase grilo users to the new locations.

Move devel/libcheck to devel/check

- Bump PORTREVISION for dependent ports

Add more PLIST_SUB to Mk/Uses/python.mk

- Add PYTHON_PYOEXTENSION and PYTHON_SUFFIX
- Add PYTHON2 and PYTHON3
- Respect PYTHON_VERSION
- Rename PYOEXTENSION to PYTHON_PYOEXTENSION

This change would help:
- Build databases/postgresql*-plpython with Python 3
  (It has PLIST issue since bsd.python.mk to Uses/python.mk transition)
- Simplify Makefile

PR:		205807
Differential Revision:	https://reviews.FreeBSD.org/D4758
Exp-run by:	antoine

${RM} already has -f.

PR:		213570
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight

audio/rhythmbox: fix packaging with python 3.5

- while here fix configure warnings by adjusting configure option names
- utilize USES=localbase
- bump PORTREVISION

PR:		213342
Approved by:	portmgr (blanket approval)

Cleanup patches, a* categories.

Rename them to follow the make makepatch naming, and regenerate them.

With hat:	portmgr
Sponsored by:	Absolight

Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.

With hat:	portmgr
Sponsored by:	Absolight

The FreeBSD GNOME team proudly presents GNOME 3.18 for FreeBSD.

The offical GNOME 3.18 release notes can be found at
https://help.gnome.org/misc/release-notes/3.18/

This update doesn't contain the glib/gtk c++ bindings which will
be done in a another update due to the requirement on c++11 and the
amount of fallout this probably will give.

GDM is still at version 3.16 due to some issues.

Bump mate-themes to use the gtk 3.18 version of the themes.

Thanks to Antoine Brodin for running the exp-runs.

This release was made possible by the following people:
  Gustau Perez
  Ting-Wei_Lan

PR:	207006

- Update audio/libmusicbrainz5 to 5.1.0
- Fix a crash in audio/sound-juicer caused by libmusicbrainz5 (fix added
  upstream, but not in this release) [1]
- Bump PORTREVISION on dependent ports

PR:		196959 [1]
Submitted by:	Pete Johanson <peter@peterjohanson.com> [1]

Fix py3-libpeas line.

Submitted by:	Freshports sanity checker

Chase libpeas change in r389277.

Disable and don't build plugins that don't work.
* Context - needs python 3 version of textproc/py-mako
* rbzeitgeist - needs python 3 of the zeitgeist bindings.
  (The python2 version is bundled in the zeitgeist port)

Don't depend on other ports to drag in py3-gobject3.

Mini gnome update. Next stop GNOME 3.16!

Update rhythmbox to 3.2.
Update gnome-tweak-tool to 3.14.3.
Update gnome-mines to 3.14.2.
Update eog to 3.14.4.
Update geary to 0.10.0.
Update tracker to 1.2.6.
Update gdm to 3.14.2.
Update gtk30 to 3.14.12.
Update gtksourceview3 to 3.14.4.

Obtained from:	GNOME dev repo

Add a dependency on databases/tdb and make brasero support optional
(default: ON).

PR:		197518
Submitted by:	kvedulv@kvedulv.de

Switch default python3 version from 3.3 to 3.4.
Bump PORTREVISIONs for the affected ports.

Exp-run by:	antoine

The FreeBSD GNOME team proudly presents GNOME 3.14 and Cinnamon 2.2.
Gnome 3.14.1 and Cinnamon 2.2.16 are supported on FreeBSD 9.3-RELEASE and up.

This commit removes the old GNOME 2 desktop, bindings and some ports that
can't be compiled. A few ports where updated to more recent versions to
allow them to compile with this update.

Apart from updating ports to newer versions

GDM is more integrated with gnome-shell now, and handles several things for
the GNOME desktop such as screen locking. If you want to use GNOME 3 via
startx, you will have to add your own lock screen/screensaver. For example
xscreensaver
can be used for sessions started without GDM.

Shell Extensions can be installed via https://extensions.gnome.org/ , we have

- Convert ports from audio/ to new USES=python

Reviewed by:	portmgr (implicit)

- Chase libplist shlib bump.

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

comms/lirc:
- Fix missing -lusb [1]
- Convert to USES=libtool and bump dependent ports
- Add INSTALL_TARGET=install-strip
- Use @sample

Reported by:	sbruno [1]

Convert the Python framework bits to USES=python.

Please use USES=python instead of USE_PYTHON.

  USE_PYTHON=yes becomes USES=python
  USE_PYTHON=2.7+ becomes USES=python:2.7+
  USE_PYTHON_BUILD=3.3 becomes USES=python:3.3,build
  ...

A new PYTHON_FEATURES variable was added, which enables certain features for a
port and replaces some knobs at the same time;

  PYTHON_FEATURES=distutils replaces USE_PYDISTUTILS
  PYTHON_FEATURES=autoplist replaces PYDISTUTILS_AUTOPLIST
  PYTHON_FEATURES=py3kplist replaces PYTHON_PY3K_PLIST_HACK

- Switch to USES=libtool, drop .la files
- Bump dependent ports as .so version has changed

Approved by:	portmgr blanket

New LIB_DEPENDS syntax

Reported by:	Mike Harding <mvharding@gmail.com>

audio/rhythmbox: drop :keepla
multimedia/banshee: add USES=libtool and INSTALL_TARGET=install-strip
multimedia/libmtp: add USES=libtool and INSTALL_TARGET=install-strip
multimedia/libaacs:
- USES=libtool pathfix
- Add INSTALL_TARGET=install-strip
- Avoid USE_AUTOTOOLS
- Remove plist target, superseded by makeplist
multimedia/libbluray:
- USES=libtool pathfix
- Add INSTALL_TARGET=install-strip
- Avoid USE_AUTOTOOLS
- Remove plist target, superseded by makeplist
- Use OPTIONS_SUB
- Replace patch with post-patch command

Bump dependent ports

Support LIBS like LDFLAGS.

- Add LIBS="${LIBS}" to MAKE_ENV and CONFIGURE_ENV.
- Add an option helper for LIBS.
- Adjust all ports that already use LIBS.  Also remove references to
  PTHREAD_CFLAGS and PTHREAD_LIBS while here.
- Some ports did not support having a LIBS environment variable and
  required additional patches.

Somewhat simplified a linker command line looks like:

${CC} ${src_LDFLAGS} ${LDFLAGS} ${src_LIBS} ${LIBS}

where src_LDFLAGS and src_LIBS are controlled by upstream and LDFLAGS and
LIBS can be controlled by us.  If possible -L and -l flags need to be

Stagify brasero
Convert to USES=libtool
Chase shlib number change
Clean up a bit chased ports

When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la.  So everything that subsequently links with libA will also
link to these extra libraries.  This causes too much overlinking.

This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging.  However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.

So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).

Support stage
USES=libtools
add missing USES=desktop-file-utils
Convert to USES=webplugin
strip binaries

- Chase libmtp move

In preparation for making libtool generate libraries with a sane name, fix all
LIB_DEPENDS in audio

With hat:	portmgr

Revert badly tested conversion to USES=webplugin

Pointyhat to:	bapt

Convert to USES=webplugin

- Remove manual creation and removal of share/applications, as it's now in the
mtree (categories starting with a)

Approved by:	portmgr (bdrewery)

Add NO_STAGE all over the place in preparation for the staging support (cat:
audio)

Add an explicit dependency on pkgconf

Approved by:	portmgr (bapt)

Convert audio from USE_GMAKE to USES=gmake
While here:
- Trim headers
- Convert some USE_GNOME=pkgconfig to USES=pkgconfig
- Add some missing pkgconf dependencies
- Convert some USE_GNOME=gnomehack to USES=pathfix

Convert to new options framework

- Convert USE_GETTEXT to USES (part 3)

Approved by:	portmgr (bapt)

 - Chase libmtp shlib bump

- update png to 1.5.10

- Chase libmtp shlib bump

Disable obsolete Musicbrainz support.

PR:             165839
Submitted by:   Jason E. Hale <bsdkaffee@gmail.com>

Fix the status icon plugin with the latest libnotify changes.

Submitted by:   sbruno
PR:             164300
Obtained from:  GNOME git

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Chase libnotify, libproxy and webkit-gtk2 shlib changes, and fix build where
needed.

- Get Rid MD5 support

Chase libgpod shlib version bump.

- Update comms/lirc to 0.9.0p1_4 in order to be able to use the lirc
  support in webcamd svn (for mceusb-based receivers/transmitters and
  USB DVB tuner remotes supported by the Linux code), and enable
  support for a few more USB devices while we're at it tho of those
  only an FTDI-based one was tested:

        http://www.huitsing.nl/irftdi/ [1]

- Fix plist for audio/rhythmbox and multimedia/totem and
  add missing LIRC_{CFLAGS,LIBS} variables to CONFIGURE_ENV for
  multimedia/xine when building them with (optional) lirc support. [2]

- Chase liblirc_client shlib version bump for ports depdending on it
  and bump PORTREVISIONs for ports depending on it by default.

Approved by:    portmgr (miwi) [2]
Thanks to:      Warren Block <wblock@wonkity.com> for testing [1]

Sync to new bsd.autotools.mk

Presenting GNOME 2.32.1 for FreeBSD. The offical release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.32/

This will be the last release of the GNOME 2.x series, mainly a bugfix and
bridge release to the first release of the GNOME 3.x series.

This release features commits by avl, marcus, mezz and myself.

The FreeBSD GNOME Team would like to thank the following contributors and
testers for there help with this release:

Zane C.B. <vvelox@vvelox.net>
romain@
Olaf Seibert <O.Seibert@cs.ru.nl>
DomiX

Fix runtime with Python 2.6.6.

Submitted by:   Thomans Gellekum <Thomas.Gellekum@gmx.de>
Obtained from:  GNOME git

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

Presenting GNOME 2.30.1 for FreeBSD. The offical release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.30/ .

This release brings initial PackageKit support, Upower (replaces power
management part of hal), cuse4bsd integration with HAL and cheese, and a
faster Evolution.

Sadly GNOME 2.30.x will be the last release with FreeBSD 6.X support. This
will also be the last of the 2.x releases. The next release will be the
highly-anticipated GNOME 3.0 which will bring with it a new UI experience.

Currently, there are a few bugs with GNOME 2.30 that may be of note for our
users. Be sure to consult the UPGRADING note or the 2.30 upgrade FAQ at
http://www.freebsd.org/gnome/docs/faq230.html for specific upgrading
instructions, and the up-to-date list of known issues.

Chase audio/libmtp update.

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

Update to 0.12.7.

Feature safe:   yes

- update to jpeg-8

Remove the leftover mtpdevice plug-in directory.

Reported by:    mac.tc <raszobbi@gmail.com>

Presenting GNOME 2.28.1 for FreeBSD.  The official release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.28/ .
Officially, this is mostly a polishing release in preparation for GNOME 3.0
due in about a year.

On the FreeBSD front, though, a lot went into this release.  Major thanks
goes to kwm and avl who did a lot of the porting work for this release.
In particular, kwm brought in Evolution MAPI support for better Microsoft
Exchange integration.  Avl made sure that the new gobject introspection
repository ports were nicely compartmentalized so that large dependencies
aren't brought in wholesale.

But, every GNOME team member (ahze, avl, bland, kwm, mezz, and myself)
contributed to this release.

Update to 0.12.6.

Update to 0.12.5.

Feature safe:   yes

Update to 0.12.4.

- Chase audio/libgpod shlib bump

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

Update to 0.12.3.

Update to 0.12.2.

Update to 0.12.1.

Correct plist for webplugin.

Submitted by:   QA tindy

Presenting GNOME 2.26 for FreeBSD.  See
http://library.gnome.org/misc/release-notes/2.26/ for a list of what's new.
On the FreeBSD front, we introduced a port of libxul 1.9 as an alternative
for Firefox 2.0 as a Gecko provider.  Almost all of the Gecko consumers
can make use of this provider by setting:

WITH_GECKO=libxul

The GNOME 2.26 port was done by ahze, kwm, marcus, and mezz with
contributions by Joseph S. Atkinson, Peter Wemm, Eric L. Chen,
Martin Matuska, Craig Butler, and Pawel Worach.

Update to 0.12.0.