| non port: audio/openspc/Makefile |
|
SVNWeb
|
Number of commits found: 34 |
|
Sun, 23 Apr 2023
|
[ 09:09 Gerald Pfeifer (gerald)  ]    8d3e020 (Only the first 10 of 2091 ports in this commit are shown above.  )
*: Bump PORTREVISIONs for math/mpc update to 1.3.1
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:20 Tobias C. Berner (tcberner) ] 213b0b7 (Only the first 10 of 561 ports in this commit are shown above. )
audio: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <dmagda+libsamplerate@ee.ryerson.ca>
* <trasz@FreeBSD.org>
* Adam Weinberger
* Adam Weinberger <adamw@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Aleksander Fafula <alex@bsdguru.org>
* Alex Allan <alex@kamaz.org.uk>
* Alexander Botero-Lowry <alex@foxybanana.com>
* Alexander Kojevnikov <alexander@kojevnikov.com>
* Alexander Nedotsukov <bland@FreeBSD.org>
* Alexander Vereeken <Alexander88207@protonmail.com> (Only the first 15 lines of the commit message are shown above )
|
|
Fri, 4 Jun 2021
|
[ 05:53 Gerald Pfeifer (gerald) ] d09ed09 (Only the first 10 of 52 ports in this commit are shown above. )
*/*: Replace USE_GCC=any with USE_GCC=yes
USE_GCC=any has been equivalent to USE_GCC=yes in most cases (such
as i386 and amd64 since 12.x and depending on configuration 11.x,
most newer installations on other platforms, and 13.x across the
board).
Since commit 96c17633d90386b5bcf8 Mk/bsd.gcc.mk is treating them as
different spellings of the same, so continue the deorbiting of the
USE_GCC=any form and simply replace it with USE_GCC=yes.
This should not make any functional difference at all.
Discussed with: mat, linimon, pkubaj
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Fri, 26 Jul 2019
|
[ 20:46 gerald ]   (Only the first 10 of 3853 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
|
|
Wed, 12 Dec 2018
|
[ 01:35 gerald ] (Only the first 10 of 3168 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
|
|
Sun, 29 Jul 2018
|
[ 22:18 gerald ] (Only the first 10 of 1480 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
|
|
Sat, 10 Mar 2018
|
[ 17:46 gerald ] (Only the first 10 of 1104 ports in this commit are shown above. )
Bump PORTREVISIONs of all users of math/mpc that we just updated to
version 1.1.0 (via revision 464079).
|
|
Sun, 10 Sep 2017
|
[ 20:55 gerald ] (Only the first 10 of 1201 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
c++14-lang, c++0x, c11, or gcc-c++11-lib.
PR: 219275
|
|
Sat, 1 Apr 2017
|
[ 15:23 gerald ] (Only the first 10 of 1118 ports in this commit are shown above. )
Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using using Mk/bsd.octave.mk which in turn has USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
c++11-lang, c++0x, c11, or gcc-c++11-lib.
PR: 216707
|
|
Sun, 20 Nov 2016
|
[ 09:38 gerald ] (Only the first 10 of 364 ports in this commit are shown above. )
Bump PORTREVISIONS for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.8.5 to GCC 4.9.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
In particular that is ports with USE_GCC=yes, USE_GCC=any, or one of
gcc-c++11-lib, openmp, nestedfct, c++11-lib as well as c++14-lang,
c++11-lang, c++0x, c11 requested via USES=compiler.
|
|
Sat, 18 Apr 2015
|
[ 19:09 tijl ] (Only the first 10 of 26 ports in this commit are shown above. )
Convert to USES=autoreconf
|
|
Tue, 6 Jan 2015
|
[ 09:36 ehaupt ] (Only the first 10 of 25 ports in this commit are shown above. )
Move MASTER_SITES from CRITICAL to LOCAL/ehaupt
|
|
Thu, 11 Sep 2014
|
[ 20:10 tijl ]
- Convert to USES=libtool and add INSTALL_TARGET=install-strip
- Add USE_AUTOTOOLS=libtoolize (and others) because the bundled libtool is
too old to support FreeBSD 4 and higher
|
|
Tue, 18 Mar 2014
|
[ 14:26 ehaupt ] (Only the first 10 of 60 ports in this commit are shown above. )
Quiesce mkdir
|
|
Thu, 13 Feb 2014
|
[ 09:39 ehaupt ]
Eliminate inclusion of bsd.port.options.mk where PORT_OPTIONS is not tested for
afterwards.
Encouraged by: mat
|
|
Wed, 12 Feb 2014
|
[ 19:23 ehaupt ]
Now that this port is staged and DOCS defined we can stop testing for DOCS in
any install target.
|
|
Wed, 23 Oct 2013
|
[ 20:30 ehaupt ] (Only the first 10 of 14 ports in this commit are shown above. )
Support staging.
|
|
Fri, 4 Oct 2013
|
[ 12:05 ehaupt ]
Fix build on 10-CURRENT
|
|
Fri, 20 Sep 2013
|
[ 14:36 bapt ] (Only the first 10 of 879 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
audio)
|
|
Wed, 24 Jul 2013
|
[ 08:19 ehaupt ] (Only the first 10 of 161 ports in this commit are shown above. )
Remove MAKE_JOBS_SAFE which is now default.
|
|
Fri, 8 Mar 2013
|
[ 14:00 ehaupt ] (Only the first 10 of 68 ports in this commit are shown above. )
Remove indefinite article from COMMENT
|
|
Tue, 15 Jan 2013
|
[ 13:40 ehaupt ] (Only the first 10 of 53 ports in this commit are shown above. )
- Use DOC instead of NOPORTDOCS
- Pacify portlint
- Convert header
|
|
Sat, 4 Dec 2010
|
[ 07:34 ade ] (Only the first 10 of 1730 ports in this commit are shown above. )
Sync to new bsd.autotools.mk
|
|
Sun, 2 Aug 2009
|
[ 19:36 mezz ] (Only the first 10 of 1514 ports in this commit are shown above. )
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
|
|
Mon, 30 Mar 2009
|
[ 14:18 ehaupt ]
Mark MAKE_JOBS_SAFE
|
|
Thu, 27 Mar 2008
|
[ 22:15 ehaupt ] (Only the first 10 of 31 ports in this commit are shown above. )
Use MASTER_SITE_CRITICAL
|
|
Thu, 29 Jun 2006
|
[ 17:52 ehaupt ]
Replace INSTALL_SHLIB with USE_LDCONFIG
|
|
Thu, 1 Jun 2006
|
[ 12:13 ehaupt ] (Only the first 10 of 83 ports in this commit are shown above. )
Add an additional mirror.
|
|
Thu, 23 Feb 2006
|
[ 10:40 ade ] (Only the first 10 of 2514 ports in this commit are shown above. )
Conversion to a single libtool environment.
Approved by: portmgr (kris)
|
|
Tue, 15 Nov 2005
|
[ 06:52 ade ] (Only the first 10 of 1438 ports in this commit are shown above. )
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
|
|
Thu, 6 Oct 2005
|
[ 11:57 ehaupt ] (Only the first 10 of 107 ports in this commit are shown above. )
Change MAINTAINER address for my ports.
Approved by: novel (mentor)
|
|
Wed, 13 Jul 2005
|
[ 12:39 pav ]
OpenSPC is an SPC command line player created using a very modified SNEeSe SPC
CPU core. It was written in C (although the SPC core is in Assembly) using
DJGPP.
PR: ports/83222
Submitted by: Emanuel Haupt <ehaupt@critical.ch>
|
Number of commits found: 34 |
As an Amazon Associate I earn from qualifying purchases.