| non port: audio/libcdaudio/Makefile |
|
SVNWeb
|
Number of commits found: 29 |
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se)  ]    b7f0544 (Only the first 10 of 27931 ports in this commit are shown above.  )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:20 Tobias C. Berner (tcberner) ] 213b0b7 (Only the first 10 of 561 ports in this commit are shown above. )
audio: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <dmagda+libsamplerate@ee.ryerson.ca>
* <trasz@FreeBSD.org>
* Adam Weinberger
* Adam Weinberger <adamw@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Aleksander Fafula <alex@bsdguru.org>
* Alex Allan <alex@kamaz.org.uk>
* Alexander Botero-Lowry <alex@foxybanana.com>
* Alexander Kojevnikov <alexander@kojevnikov.com>
* Alexander Nedotsukov <bland@FreeBSD.org>
* Alexander Vereeken <Alexander88207@protonmail.com> (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Sun, 24 Feb 2019
|
[ 12:47 novel ]   (Only the first 10 of 16 ports in this commit are shown above. )
Drop maintainership
Return back to the pool ports I no longer use.
|
|
Wed, 7 May 2014
|
[ 23:21 bapt ]
Strip binaries
USES=libtool
|
|
Tue, 24 Sep 2013
|
[ 06:24 bapt ] (Only the first 10 of 61 ports in this commit are shown above. )
Remove NO_STAGE to ports natively stage ready shown by a FORCE_STAGE exp-run
Exp-run by: bdrewery
|
|
Fri, 20 Sep 2013
|
[ 14:36 bapt ] (Only the first 10 of 879 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
audio)
|
|
Mon, 2 Sep 2013
|
[ 10:06 bapt ] (Only the first 10 of 25 ports in this commit are shown above. )
Eliminate USE_GNOME=pkgconfig from audio
While here:
- trim headers
- convert USE_GMAKE -> USES=gmake
- convert USE_GNOME=gnomehack -> USES=pathfix
- convert USE_PERL5 -> USES=perl5
|
|
Thu, 11 Aug 2011
|
[ 19:20 kwm ] (Only the first 10 of 543 ports in this commit are shown above. )
Remove USE_GNOME=gnometarget from ports. It has been a empty keyword since
mid 2008.
PR: ports/159624
Submitted by: Ruslan Mahmatkhanov <cvs-src@yandex.ru>
|
|
Sat, 4 Dec 2010
|
[ 07:34 ade ] (Only the first 10 of 1730 ports in this commit are shown above. )
Sync to new bsd.autotools.mk
|
|
Sat, 22 Aug 2009
|
[ 00:13 amdmi3 ] (Only the first 10 of 195 ports in this commit are shown above. )
- Switch SourceForge ports to the new File Release System: categories starting
with A
|
|
Sun, 2 Aug 2009
|
[ 19:36 mezz ] (Only the first 10 of 1514 ports in this commit are shown above. )
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
|
|
Sun, 11 Jan 2009
|
[ 13:22 miwi ]
- Fix:
Heap-based buffer overflow in the cddb_read_disc_data function in
cddb.c in libcdaudio 0.99.12p2 allows remote attackers to execute
arbitrary code via long CDDB data.
Buffer overflow in discdb.c for grip 3.1.2 allows attackers to cause
a denial of service (crash) and possibly execute arbitrary code by
causing the cddb lookup to return more matches than expected.
PR: 129050
Submitted by: Eygene Ryabinkin <rea-fbsd@codelabs.ru>
Approved by: novel@ (maintainer)
Security:
http://www.vuxml.org/freebsd/bd730827-dfe0-11dd-a765-0030843d3802.html
|
|
Sat, 19 Apr 2008
|
[ 17:56 miwi ] (Only the first 10 of 2842 ports in this commit are shown above. )
- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+
Thanks to all Helpers:
Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
ehaupt, nox, itetcu, flz, pav
PR: 116263
Tested on: pointyhat
Approved by: portmgr (pav)
|
|
Sun, 28 Jan 2007
|
[ 09:07 kris ] (Only the first 10 of 103 ports in this commit are shown above. )
Use libtool port instead of included one to avoid objformat a.out botch
|
|
Thu, 23 Feb 2006
|
[ 10:40 ade ] (Only the first 10 of 2514 ports in this commit are shown above. )
Conversion to a single libtool environment.
Approved by: portmgr (kris)
|
|
Tue, 15 Nov 2005
|
[ 06:52 ade ] (Only the first 10 of 1438 ports in this commit are shown above. )
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
|
|
Fri, 16 Sep 2005
|
[ 11:43 novel ]
- Update to 0.99.12p2
- Take maintainership
|
|
Sat, 6 Nov 2004
|
[ 19:47 ahze ]
Update to 0.99.12
PR: ports/73332
Submitted by: Roman Bogorodskiy <bogorodskiy@inbox.ru>
Approved by: pav (co mentor)
|
|
Fri, 9 Jul 2004
|
[ 17:43 marcus ] (Only the first 10 of 489 ports in this commit are shown above. )
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
|
|
Tue, 6 Apr 2004
|
[ 20:57 krion ]
- Update to version 0.99.10
PR: ports/65260
Submitted by: Ports Fury
|
|
Sun, 14 Mar 2004
|
[ 06:17 ade ] (Only the first 10 of 945 ports in this commit are shown above. )
Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
|
|
Fri, 27 Jun 2003
|
[ 03:29 kris ]
Fix bad static buffer bound. Bump PORTREVISION.
Obtained from: OpenBSD
|
|
Sun, 18 May 2003
|
[ 22:42 petef ]
Update to 0.99.9.
PR: 51668
Submitted by: Ports Fury
|
|
Thu, 20 Feb 2003
|
[ 16:49 knu ] (Only the first 10 of 170 ports in this commit are shown above. )
De-pkg-comment.
|
|
Sat, 17 Aug 2002
|
[ 18:47 naddy ]
Update to version 0.99.6.
PR: 41730
Submitted by: Ports Fury
|
|
Tue, 22 May 2001
|
[ 17:43 roam ]
Chase MASTER_SITES. The site in the PR turned out to be a Sunsite mirror, so
use Sunsite.
|
|
Fri, 16 Jun 2000
|
[ 22:52 asami ] (Only the first 10 of 264 ports in this commit are shown above. )
Rename INSTALLS_SHLIBS to INSTALLS_SHLIB. (There was a typo in the previous
commit message to bsd.port.mk, which said INSTALL_SHLIBS. Boo.)
|
[ 09:48 sobomax ] (Only the first 10 of 181 ports in this commit are shown above. )
Fourth round of INSTALLS_SHLIBS conversion.
|
Number of commits found: 29 |
As an Amazon Associate I earn from qualifying purchases.