*/*: drop useless master site

downloads.xiph.org already redirects to ftp.osuosl.org, so the
latter adds no redundancy.

Reported by:	diizzy

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

audio: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  <dmagda+libsamplerate@ee.ryerson.ca>
  *  <trasz@FreeBSD.org>
  *  Adam Weinberger
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Aleksander Fafula <alex@bsdguru.org>
  *  Alex Allan <alex@kamaz.org.uk>
  *  Alexander Botero-Lowry <alex@foxybanana.com>
  *  Alexander Kojevnikov <alexander@kojevnikov.com>
  *  Alexander Nedotsukov <bland@FreeBSD.org>
  *  Alexander Vereeken <Alexander88207@protonmail.com>

audio/libao: Add CPE information

Approved by:	portmgr (blanket)

*/*: Add a backup master site to all Xiph.org ports

The downloads.xiph.org master site requires TLS1.3, which is not
supported by FreeBSD 11's OpenSSL and fetch(1).  Add ftp.osuosl.org
as a backup to all Xiph.org ports.

PR:		256515
Reported by:	Daniel Engberg

Remove # $FreeBSD$ from Makefiles.

audio/sndio: Update to 1.7.0

audio/libao: advertise Sndio support in pkg-descr

audio/libao: do not advertize expired esound in pkg-descr

Fix plist after ESOUND option removal in r493867.

Approved by:	fixit portmgr blanket

First step at deorbitting esound:
remove esound options where it is possible to

Enable sndio support in libao, based on the OpenBSD port.

Also add --disable-alsa to CONFIGURE_ARGS because without it the
port tries to link with libasound when it's installed.

PR:		211662
Submitted by:	Tobias Kortkamp <t@tobik.me>

Cleanup patches, a* categories.

Rename them to follow the make makepatch naming, and regenerate them.

With hat:	portmgr
Sponsored by:	Absolight

Add license information.

PR:		210126
Submitted by:	takefu@airport.fm

Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.

With hat:	portmgr
Sponsored by:	Absolight

Use the new test framework in my ports, if applicable.
While here, also strip more libraries.

Remove $FreeBSD$ from patches files in categories a-j.

With hat:	portmgr
Sponsored by:	Absolight

Cleanup plist

- Drop .la files, no dependees require them

Approved by:	portmgr blanket

Update to 1.2.0.  No user-visible changes.

Switch to USES=libtool:keepla.

Fix properties on pkg-plist

Make use of opt_USE.

Convert to stage and overhaul.

Add NO_STAGE all over the place in preparation for the staging support (cat:
audio)

Eliminate USE_GNOME=pkgconfig from audio
While here:
- trim headers
- convert USE_GMAKE -> USES=gmake
- convert USE_GNOME=gnomehack -> USES=pathfix
- convert USE_PERL5 -> USES=perl5

For all my ports
* remove MAKE_JOBS_SAFE (default now)
* change USE_GMAKE=yes to USES=gmake

Remove non default option on audio/arts which has been removed from the tree

Reported by:	mat

Convert to new options framework.

Bump PORTREVISION to have the port rebuilt after the GDBM upgrade.
This affects configurations using the PULSEAUDIO option only.

Approved by: naddy@ (maintainer)
PR:          ports/161084

Update to 1.1.0.  No user-visible changes.

- Get Rid MD5 support

Sync to new bsd.autotools.mk

Update to 1.0.0.  Improvements in this release:
* Added surround channel mapping API and capability
* New config file options
* Driver options may be specified in config file
* Workaround for ESD non-4096 byte write bug
* Workaround aRts server crash bug
* Numerous patches from multiple downstreams

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

allow parallel building

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

Presenting GNOME 2.20.1 and all related works for FreeBSD.  The official
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ .  Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).

The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy.  We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD.  This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.

This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully.  Ahze and pav also deserve thanks for

- Remove --mandir and --infodir from CONFIGURE_ARGS. They are now default
  in bsd.port.mk.

Tested with:    my tinderbox on i386 6
Approved by:    portmgr

* Update to 0.8.8.
* Add optional support for PulseAudio.
* Don't build nonsensical static modules.
* Use OPTIONS framework.

Use preferred URL for master site.

Submitted by:   db

Configuration file libao.conf should be in ${PREFIX}/etc.

PR:             109914
Submitted by:   Ed Schouten <ed@fxq.nl>

Use libtool port instead of included one to avoid objformat a.out botch

On special request, provide a full prototype for ao_default_driver_id()
in ao.h.

PR:             107903
Submitted by:   Ed Schouten <ed@fxq.nl>

Don't clobber LIB_DEPENDS if several WITH_* options are set.

PR:             101469
Submitted by:   jacula@gmail.com

Remove .a files from pkg-plist.

Approved by:    portmgr(marcus), naddy(maintainer)

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

SHA256ify

Approved by:            krion@

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Maintenance update to 0.8.5.  No notable changes.

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

Add size data, approved by maintainers.

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

portlint (whitespace cleanup)

Install pkgconfig .pc file to correct place

PR:             57802
Submitted by:   Ports Fury

* Maintenance update to 0.8.4.
* Support for the aRts plugin now must be explicitly enabled by
  defining WITH_ARTS.
* NAS plugin available by defining WITH_NAS.  Consider experimental.

Remove dead mirror.

Submitted by:   fenner (portsurvey)

Remove the USE_GNOMENG macro.

pkg-comment -> COMMENT

Update master sites.

PR:             47676, 47677
Submitted by:   Sergey A. Osokin <osa@FreeBSD.org.ru>

Updated mastersites: ftp.linuxpowered.com is an empty ftp-site,
xiph.stratius.com is unreachable for a long time.

Fix packaging list.

Use USE_GNOMENG.

PR:             42232
Submitted by:   Edwin Groothuis <edwin@mavetju.org>

* Use GNOMENG for ESounD.
* Kill .la files.

Make sure the esd module is only built if wanted.

Submitted by:   David Magda <dmagda@ee.ryerson.ca>

Welcome to the long-awaited release of Ogg Vorbis 1.0!

Update the arts dependency to the audio/arts port for kde3.

PR:             39725
Submitted by:   alane

machine/soundcard.h -> sys/soundcard.h

PR:             36966
Submitted by:   Motoyuki Konno <motoyuki@bsdclub.org>

There is no static libao.    

fix typo in master site URL    

oops, missed one    

Upgrade to Ogg Vorbis RC3.    

Update my MAINTAINER address.    

Update libao to 0.8.0, which breaks mpg321.  Update libogg, libvorbis,  
vorbis-tools and the vorbis meta-port to 1.0rc2.  This version   supports
"channel coupling" for more efficient compression of stereo   material.    

o update to 1.0 RC1.     PORTEPOCH bumped due to PKGNAME now strictly follows
handbook.     (1.0b4,1 > 1.0.r1,1 vs. 1.0b4,1 < 1.0.r1,2)   o support
NOPORTDOCS.   o remove stale MASTER_SITES.    

minor changes to documentation    

Fix PLIST.  The correct PLIST_SUB variable is PORTDOCS, not NOPORTDOCS.    

Change "name <mailaddress>" to "mailaddress" in MAINTAINER, it is   confusing
the hell out of make.    

Change maintainer for libao, libogg, libvorbis, and vorbis.  Improve   use of
autoconf and automake.  Support NOPORTDOCS.  Respect CFLAGS.   Fix libvorbis
encoder on Alpha.  Install documentation in proper   places.    

Fix plist    

bump PORTREVISION due to pkg-plist addition.    

o respect CFLAGS (libao, libogg, libvorbis)   o add ESOUND and KDE2 knob.
(libao)   o add WWW. (libogg)   o get rid of xmms dependency. (vorbis)    

upgrade to 0.6.0    

Add AUTO{CONF,MAKE}_{ENV,ARGS}.  Among other things, this will fix  
audio/libao, audio/libogg, audio/libvorbis and audio/vorbis-tools   which need
--add-missing to be passed to automake.    

Add USE_AUTOMAKE    

Add new port of libao, a portable sound library used by some vorbis   tools.