| non port: astro/libnova/Makefile |
|
SVNWeb
|
Number of commits found: 46 |
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se)  ]    b7f0544 (Only the first 10 of 27931 ports in this commit are shown above.  )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:20 Tobias C. Berner (tcberner) ] b152544 (Only the first 10 of 105 ports in this commit are shown above. )
astro: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* ABURAYER Rewsirow <rewsirow@ff.iij4u.or.jp>
* Alexander Leidinger
* Alexey Dokuchaev <danfe@FreeBSD.org>
* Andrew Pantyukhin <infofarmer@FreeBSD.org>
* Andrey Zakhvatov
* Anton Berezin <tobez@FreeBSD.org>
* Anton Berezin <tobez@tobez.org>
* Anton Karpov <toxa@toxahost.ru>
* Brion Moss <brion@queeg.com>
* Bruce M Simpson <bms@FreeBSD.org>
* Chris Piazza <cpiazza@FreeBSD.org> (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Sat, 14 Jul 2018
|
[ 08:11 yuri ]  
astro/libnova: Add LICENSE/LICENSE_FILE
Approved by: portmgr blanket
|
|
Wed, 25 May 2016
|
[ 15:43 mat ] (Only the first 10 of 83 ports in this commit are shown above. )
Remove useless WRKSRC definitions.
While there, correct DEV_WARNINGS when they occur.
Sponsored by: Absolight
|
|
Fri, 12 Jun 2015
|
[ 20:58 erwin ] (Only the first 10 of 57 ports in this commit are shown above. )
Reset dhn's ports
PR: 197522
Submitted by: jbeich
Approved by: portmgr
|
|
Thu, 18 Dec 2014
|
[ 11:34 bapt ]
Convert to USES=autoreconf
Strip binaries
|
|
Sat, 13 Sep 2014
|
[ 18:25 tijl ] (Only the first 10 of 30 ports in this commit are shown above. )
Use default LIBTOOLIZE_ARGS
|
|
Thu, 24 Apr 2014
|
[ 17:14 tijl ]
Convert to USES=libtool.
Unfortunately the libtool scripts in this port come from different
versions so libtoolize (and all other autotools) has to be run.
|
|
Wed, 25 Sep 2013
|
[ 00:54 bdrewery ] (Only the first 10 of 179 ports in this commit are shown above. )
- Remove NO_STAGE as these have been tested to be safe
With hat: portmgr
|
|
Fri, 20 Sep 2013
|
[ 13:14 bapt ] (Only the first 10 of 123 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
astro)
|
|
Fri, 13 Jul 2012
|
[ 09:43 dhn ]
- Update to 0.15.0
|
|
Tue, 30 Aug 2011
|
[ 15:15 dhn ]
- Update to 0.14.0
|
|
Thu, 11 Aug 2011
|
[ 19:20 kwm ] (Only the first 10 of 543 ports in this commit are shown above. )
Remove USE_GNOME=gnometarget from ports. It has been a empty keyword since
mid 2008.
PR: ports/159624
Submitted by: Ruslan Mahmatkhanov <cvs-src@yandex.ru>
|
|
Sat, 4 Dec 2010
|
[ 07:34 ade ] (Only the first 10 of 1730 ports in this commit are shown above. )
Sync to new bsd.autotools.mk
|
|
Sat, 22 Aug 2009
|
[ 00:13 amdmi3 ] (Only the first 10 of 195 ports in this commit are shown above. )
- Switch SourceForge ports to the new File Release System: categories starting
with A
|
|
Wed, 5 Aug 2009
|
[ 12:20 dhn ]
- Update to 0.13.0
|
|
Sun, 2 Aug 2009
|
[ 19:36 mezz ] (Only the first 10 of 1514 ports in this commit are shown above. )
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
|
|
Fri, 6 Mar 2009
|
[ 18:14 dhn ] (Only the first 10 of 64 ports in this commit are shown above. )
- Use my FreeBSD address on the ports I maintain
Approved by: tabthorpe (co-mentor)
|
|
Tue, 20 Jan 2009
|
[ 08:26 amdmi3 ]
- Update to 0.12.3
PR: 130556
Submitted by: Dennis Herrmann <adox at mcx2 dot org>
|
|
Mon, 5 Jan 2009
|
[ 17:27 pav ] (Only the first 10 of 56 ports in this commit are shown above. )
- Remove conditional checks relevant only on FreeBSD 5.x and older
|
|
Sat, 3 Jan 2009
|
[ 13:38 chinsan ]
- Pass maintainership to PR submitter
PR: ports/129888
Submitted by: Dennis Herrmann <adox@mcx2.org>
|
[ 12:25 chinsan ]
- Update to 0.12.2
|
|
Tue, 16 Dec 2008
|
[ 05:15 linimon ] (Only the first 10 of 11 ports in this commit are shown above. )
Reset quakelee@cn.FreeBSD.org due to maintainer-timeouts and no response
to email.
Hat: portmgr
|
|
Thu, 15 Feb 2007
|
[ 03:47 delphij ]
Pass maintainership to last submitter.
|
|
Sat, 10 Feb 2007
|
[ 21:44 nivit ]
- Updated to 0.12.1
PR: ports/109005
Submitted by: CHAO Shin <quakelee at cn.freebsd.org>
Approved by: alexbl (mentor, implicit)
|
|
Thu, 1 Feb 2007
|
[ 02:42 kris ] (Only the first 10 of 348 ports in this commit are shown above. )
Use libtool port instead of included version to avoid objformat a.out botch
|
|
Fri, 18 Aug 2006
|
[ 18:15 delphij ]
Update to 0.12.0.
Submitted by: Frank W. Josellis <frank dynamical-systems org>
PR: ports/102119
|
|
Mon, 14 Aug 2006
|
[ 10:08 clsung ] (Only the first 10 of 29 ports in this commit are shown above. )
- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- these include astro/ audio/ biology/ chinese/ maintained by ports@
PR: ports/101916
Submitted by: Gea-Suan Lin <gslin_AT_gslin dot org>
|
|
Thu, 23 Feb 2006
|
[ 10:40 ade ] (Only the first 10 of 2514 ports in this commit are shown above. )
Conversion to a single libtool environment.
Approved by: portmgr (kris)
|
|
Sat, 18 Feb 2006
|
[ 21:25 mnag ]
- Change nan("chars") to strtod("NAN(chars)", NULL) and remove dependency of gcc
3.3
- Bump PORTREVISION
- portlint(1)
PR: 93520
Submitted by: Frank W. Josellis <frank@dynamical-systems.org>
|
|
Tue, 15 Nov 2005
|
[ 06:52 ade ] (Only the first 10 of 1438 ports in this commit are shown above. )
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
|
|
Tue, 11 Oct 2005
|
[ 00:44 edwin ]
nan() is a gcc 3.3-ism, therefor require GCC 3.3 for this port.
|
|
Sun, 9 Oct 2005
|
[ 01:13 edwin ]
Upgrade to 0.11.0
|
|
Tue, 31 May 2005
|
[ 15:59 oliver ]
don't install .la files
|
[ 15:44 oliver ]
change the libtool version to use from 1.3 to 1.5
|
|
Fri, 9 Jul 2004
|
[ 17:43 marcus ] (Only the first 10 of 489 ports in this commit are shown above. )
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
|
|
Sun, 14 Mar 2004
|
[ 06:17 ade ] (Only the first 10 of 945 ports in this commit are shown above. )
Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
|
|
Mon, 26 Jan 2004
|
[ 19:32 krion ]
- Support CFLAGS properly
PR: ports/61950
Submitted by: Ports Fury
|
|
Sun, 25 Jan 2004
|
[ 16:26 krion ]
- Update to version 0.9.0
|
|
Wed, 30 Jul 2003
|
[ 21:04 krion ]
Update to 0.8.0
Approved by: fjoe (mentor) (implicit)
|
|
Wed, 30 Apr 2003
|
[ 02:20 naddy ]
Update to 0.7
PR: 51542
Submitted by: Clement Laforet <sheepkiller@cultdeadsheep.org>
|
|
Thu, 20 Feb 2003
|
[ 16:46 knu ] (Only the first 10 of 46 ports in this commit are shown above. )
De-pkg-comment.
|
|
Sun, 2 Feb 2003
|
[ 14:31 nork ]
Update to 0.6.0.
PR: ports/47748
Submitted by: Ports Fury
|
|
Mon, 27 Jan 2003
|
[ 15:12 arved ]
Update to 0.5.1
PR: 47485
Submitted by: KATO Tsuguru <tkato@prontomail.com>
|
|
Wed, 23 Oct 2002
|
[ 08:48 ijliao ]
add libnova 0.5.0
Astronomical Calculation Library
|
Number of commits found: 46 |
As an Amazon Associate I earn from qualifying purchases.