| non port: archivers/lbzip2/Makefile |
|
SVNWeb
|
Number of commits found: 20 |
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se)  ]    b7f0544 (Only the first 10 of 27931 ports in this commit are shown above.  )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:20 Tobias C. Berner (tcberner) ] 1ced9d2 (Only the first 10 of 199 ports in this commit are shown above. )
archivers: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* Aaron Dalton <aaron@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Albert Vernon <f3cun3c02@sneakemail.com>
* Alex Dupre <ale@FreeBSD.org>
* Alex Samorukov <samm@freebsd.org>
* Alexander Kuehn <freebsd@nagilum.org>
* Alexander Logvinov <ports@logvinov.com>
* Alexander Zhuravlev <zaa@zaa.pp.ru>
* Alexey Dokuchaev <danfe@FreeBSD.org>
* Alexey Dokuchaev <danfe@regency.nsu.ru>
* Anders Nordby <anders@FreeBSD.org> (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Sat, 3 Aug 2019
|
[ 18:19 danfe ]  
Provide fall-back distfile location while official mastersite is not
accessible, and assume maintainership. This port can be very useful
as PKG_DEPENDS alternative to default packaging method because it is
about twice as fast compared to `archivers/pbzip2', another parallel
BZIP2 compressor we have in the ports.
|
[ 11:08 antoine ]
Mark BROKEN: unfetchable
|
|
Wed, 13 Jun 2018
|
[ 09:49 danfe ]
- Update `archivers/lbzip2' to version 2.5, switch
to the `.tar.bz2' distfile (USES=tar:bzip2)
- Update MASTER_SITES and add LICENSE (GPLv3)
- The build system is GNU autotools-based since 2.x
- Install more complete set of documentation files
- Drop no longer needed WRKSRC, the patch file, and
`do-install' target
- Get rid of the .for loop when installing files on
the PORTDOCS list
|
|
Mon, 11 Jun 2018
|
[ 20:56 feld ] (Only the first 10 of 19 ports in this commit are shown above. )
Reset MAINTAINER
Multiple consecutive previous maintainer timeouts
|
|
Tue, 19 Jul 2016
|
[ 11:04 mat ] (Only the first 10 of 174 ports in this commit are shown above. )
When there is a do-install target, do not use a post-install target, do
everything at once. Sometime, rename post-install into a options helper
target.
I did not fix ports that were such a mess that I could not figure out
what they really wanted to do. I also did not change ports that had
some version of an auto-plist code in post-install, for the same reason.
With hat: portmgr
Sponsored by: Absolight
|
|
Wed, 16 Jul 2014
|
[ 03:47 adamw ] (Only the first 10 of 42 ports in this commit are shown above. )
Add DOCS to OPTIONS_DEFINE where PORTDOCS= is set.
|
|
Thu, 26 Dec 2013
|
[ 14:34 bapt ]
Support stage
|
|
Fri, 20 Sep 2013
|
[ 13:11 bapt ] (Only the first 10 of 221 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
archivers)
|
|
Tue, 18 Dec 2012
|
[ 07:57 danfe ] (Only the first 10 of 32 ports in this commit are shown above. )
For a number of ports in archives category, trim the header and drop leading
indefinite article from COMMENT line; also fix few noticed styles bugs while
I am here.
|
|
Wed, 17 Mar 2010
|
[ 03:08 gabor ]
- Update 0.23
Version: lbzip2-0.23
Focus: Minor feature enhancements
Date: 03-Mar-2010
Changes: In this release, if lbzip2 intends to exit with status 1 due to any
fatal error, but any SIGPIPE or SIGXFSZ with inherited SIG_DFL action
was generated for lbzip2 previously, then lbzip2 terminates by way of
one of said signals, after cleaning up any interrupted output file.
This should improve compatibility with GNU tar, when it spawns lbzip2
as a filter, and closes the pipe between them early, before it
receives an EOF from lbzip2.
|
|
Fri, 19 Feb 2010
|
[ 20:58 gabor ]
- Update to 0.22
Version: lbzip2-0.22
Focus: Minor bugfixes
Date: 18-Feb-2010
Changes: Building lbzip2 on Debian unstable discovered that the "lfs.sh" build
script, due to a typo, did not invoke the "getconf" utility in a
SUSv2-conformant way. This bug has been corrected.
Version: lbzip2-0.21
Focus: Minor bugfixes
Date: 17-Feb-2010
Changes: Code examination revealed that lbzip2-0.18 introduced a race between
the following two code paths: (1) the muxer thread displays an error
message when it encounters a write error, (2) the main thread, in
preparation to terminate the process, frees the output file name after
an INT or TERM signal is delivered to it. This bug had negligible
chance to occur, but it was fixed nonetheless.
Feature safe: yes
|
|
Fri, 5 Feb 2010
|
[ 21:54 gabor ]
- Update to 0.20
- Install manual page
- Support for PORTDOCS
|
|
Sun, 20 Dec 2009
|
[ 18:57 gabor ]
- Update to 0.19
Version: lbzip2-0.19
Focus: Minor bugfixes
Date: 01-Dec-2009
Changes: This release works around a GNU/kFreeBSD standards-compliance problem.
GNU/kFreeBSD does not define some STREAMS-related errno macros
mandated by SUSv2. Consequently, lbzip2-0.18 cannot be built on
GNU/kFreeBSD. This version checks if those (and some other) macros are
defined before relying them.
Version: lbzip2-0.18
Focus: Major feature enhancements
Date: 29-Nov-2009
Changes: After adding sanity checks to both decompressors, the following
features were implemented: removal of input FILE operands; options
--keep and --force; copying of owner, group, permission bits, access
time, modification time to regular output files. Logging was cleaned
up and internally categorized into INFO, WARNING and FATAL levels; a
separate exit status was introduced for the case when a warning
message was printed. The decompressor robustness tests were
re-executed. The author has finally replaced bzip2 with lbzip2 on his
system.
|
|
Sat, 31 Oct 2009
|
[ 13:49 gabor ]
- Update to 0.17
PR: ports/139981 (based on)
Submitted by: sylvio
|
|
Thu, 9 Apr 2009
|
[ 22:27 gabor ]
- Update to 0.15
|
|
Sun, 15 Mar 2009
|
[ 20:41 gabor ]
- Update to 0.14
|
|
Mon, 9 Feb 2009
|
[ 20:21 gabor ]
A multi-threaded bzip2/bunzip2 filter that doesn't depend on the lseek()
system call and so isn't restricted to regular files.
WWW: http://phptest11.atw.hu/
|
Number of commits found: 20 |
As an Amazon Associate I earn from qualifying purchases.