Port details |
- py-borgbackup11 Deduplicating backup program
- 1.1.18_3 archivers =0 1.1.18_3Version of this port present on the latest quarterly branch.
- Maintainer: mandree@FreeBSD.org
- Port Added: 2022-09-03 14:48:18
- Last Update: 2024-04-18 21:46:06
- Commit Hash: 5c457fb
- Also Listed In: python
- License: BSD3CLAUSE
- WWW:
- https://pypi.org/project/borgbackup/
- Description:
- [excerpt from borgbackup web site]
BorgBackup (short: Borg) is a deduplicating backup program. Optionally, it
supports compression and authenticated encryption.
The main goal of Borg is to provide an efficient and secure way to backup data.
The data deduplication technique used makes Borg suitable for daily backups
since only changes are stored. The authenticated encryption technique makes it
suitable for backups to not fully trusted targets.
- ¦ ¦ ¦ ¦
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - There is no configure plist information for this port.
- Dependency lines:
-
- ${PYTHON_PKGNAMEPREFIX}borgbackup11>0:archivers/py-borgbackup11@${PY_FLAVOR}
- To install the port:
- cd /usr/ports/archivers/py-borgbackup11/ && make install clean
- To add the package, run one of these commands:
- pkg install archivers/py-borgbackup11
- pkg install py39-borgbackup11
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above. NOTE: This is a Python port. Instead of py39-borgbackup11 listed in the above command, you can pick from the names under the Packages section.- PKGNAME: py39-borgbackup11
- Package flavors (<flavor>: <package>)
- distinfo:
- TIMESTAMP = 1654597105
SHA256 (borgbackup-1.1.18.tar.gz) = 5cba5fe7db4d08944b467ec11efc017687a512b0d98ccf0ad1aa9c4329665275
SIZE (borgbackup-1.1.18.tar.gz) = 3854385
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- py39-setuptools-scm>=1.7 : devel/py-setuptools-scm@py39
- pkgconf>=1.3.0_1 : devel/pkgconf
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- Test dependencies:
-
- py39-packaging>=19.0 : devel/py-packaging@py39
- py39-llfuse>0 : devel/py-llfuse@py39
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- py39-tox>3.2 : devel/py-tox@py39
- py39-virtualenv>=0 : devel/py-virtualenv@py39
- py39-pkgconfig>=0 : devel/py-pkgconfig@py39
- py39-wheel>=0 : devel/py-wheel@py39
- fakeroot : security/fakeroot
- python3.9 : lang/python39
- Runtime dependencies:
-
- py39-packaging>=19.0 : devel/py-packaging@py39
- py39-llfuse>0 : devel/py-llfuse@py39
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- Library dependencies:
-
- liblz4.so : archivers/liblz4
- libzstd.so : archivers/zstd
- libxxhash.so : devel/xxhash
- There are no ports dependent upon this port
Configuration Options:
- ===> The following configuration options are available for py39-borgbackup11-1.1.18_3:
FUSE=on: Support to mount locally borg backup files
===> Use 'make config' to modify these settings
- Options name:
- archivers_py-borgbackup11
- USES:
- pkgconfig python ssl
- pkg-message:
- For install:
- In order to mount locally a remote archive or an entire repository as a FUSE
filesystem, it is required to load fusefs module, for instance, as root, run:
kldload fusefs
To load the module at boot time, you can add it to the kld_list variable
in /etc/rc.conf or related files, for instance, by running
sysrc kld_list+=fusefs
as root. Alternatively, to load the module earlier, you can manually add
fusefs_load="YES"
to /boot/loader.conf.local or /boot/loader.conf with a text editor.
Also, if you plan to mount borg repositories as non root user, you need to run
# sysctl vfs.usermount=1
and add the line
vfs.usermount=1
to /etc/sysctl.conf to ensure the setting is loaded at boot time.
- Master Sites:
|
Number of commits found: 8
Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
Commit | Credits | Log message |
1.1.18_3 18 Apr 2024 21:46:06 |
Matthias Andree (mandree) |
archivers/py-borgbackup11: fix pkg-message instructions
which were suggesting to add the loader.conf variable fusefs_load
to rc.conf instead via sysrc.
Reported by: zero1@zaclys.net
PR: 278429
MFH: 2024Q2 |
1.1.18_2 29 Feb 2024 07:18:32 |
Charlie Li (vishwin) |
devel/py-setuptools-scm: update to 8.0.4
Directory and PORTNAME changed to match normalised name in release
tarball; consumers updated to match.
Although setuptools itself is specified as a run dependency in the
Python package metadata, it is currently left out here to prevent
environment pollution until at least PR 270510 is committed.
Additionally, this version of setuptools-scm requires setuptools>=61,
which means this version is only meant for USE_PYTHON=pep517 ports
as all USE_PYTHON=distutils ports will switch to devel/py-setuptools58
also after PR 270510. science/py-emmet-core is switched to
devel/py-setuptools_scm7 accordingly, as it specifies setuptools-scm<8.
devel/py-{flit-scm,hatch-vcs} have ${PY_SETUPTOOLS} added to
RUN_DEPENDS to compensate.
Further details: https://wiki.freebsd.org/Python/setuptools
Reported by: yuri
Co-authored by: matthew
Exp-run by: antoine (earlier iteration)
Approved by: yuri (science/py-emmet-core, previous iteration)
PR: 272134
Differential Revision: https://reviews.freebsd.org/D39288 |
1.1.18_2 10 Jan 2024 08:16:01 |
Baptiste Daroussin (bapt) |
MAN?PREFIX: eleminate its usage and move man to share/man |
1.1.18_2 11 Jan 2023 15:58:34 |
Dmitry Marakasov (amdmi3) |
*/*: rename CHEESESHOP to PYPI in MASTER_SITES
PR: 267994
Differential revision: D37518
Approved by: bapt |
07 Sep 2022 21:58:51 |
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
1.1.18_2 07 Sep 2022 21:10:59 |
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above ) |
1.1.18_2 03 Sep 2022 18:50:19 |
Matthias Andree (mandree) |
archivers/py-borgbackup*: staging without HOME
Building as non-root often inherits the "nobody" user's would-be home
directory, "/nonexistent", which is just that. Provide something blank
in the WRKDIR instead.
Reported by: Juraj Lutter (otis@)
Unrelated to, but still mentioned for...
PR: 264816 |
1.1.18_2 03 Sep 2022 14:33:11 |
Matthias Andree (mandree) |
archivers/py-borgbackup: update to 1.2.2+man+test, preserve 1.1
Take maintainership, because original maintainer asked for a new
maintainer, https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=264816#c10
¡Muchas gracias, José! Thanks for maintaining the port thus far.
If there is a potential maintainer who is using BorgBackup at scale,
I will be happy to pass maintainership on.
Update to v1.2.2 [1, was for 1.2.1],
preserve the earlier 1.1.18 version (also with manpages and self-tests added,
hence bumping PORTREVISION) as py-borgbackup11, and document this in UPDATING.
ChangeLog: https://www.borgbackup.org/releases/borg-1.2.html (Only the first 15 lines of the commit message are shown above ) |
Number of commits found: 8
|